// MESSAGE SYS_STATUS PACKING #define MAVLINK_MSG_ID_SYS_STATUS 1 typedef struct MAVLINK_PACKED __mavlink_sys_status_t { uint32_t onboard_control_sensors_present; /*< Bitmask showing which onboard controllers and sensors are present. Value of 0: not present. Value of 1: present. Indices defined by ENUM MAV_SYS_STATUS_SENSOR*/ uint32_t onboard_control_sensors_enabled; /*< Bitmask showing which onboard controllers and sensors are enabled: Value of 0: not enabled. Value of 1: enabled. Indices defined by ENUM MAV_SYS_STATUS_SENSOR*/ uint32_t onboard_control_sensors_health; /*< Bitmask showing which onboard controllers and sensors are operational or have an error: Value of 0: not enabled. Value of 1: enabled. Indices defined by ENUM MAV_SYS_STATUS_SENSOR*/ uint16_t load; /*< Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000*/ uint16_t voltage_battery; /*< Battery voltage, in millivolts (1 = 1 millivolt)*/ int16_t current_battery; /*< Battery current, in 10*milliamperes (1 = 10 milliampere), -1: autopilot does not measure the current*/ uint16_t drop_rate_comm; /*< Communication drops in percent, (0%: 0, 100%: 10'000), (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV)*/ uint16_t errors_comm; /*< Communication errors (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV)*/ uint16_t errors_count1; /*< Autopilot-specific errors*/ uint16_t errors_count2; /*< Autopilot-specific errors*/ uint16_t errors_count3; /*< Autopilot-specific errors*/ uint16_t errors_count4; /*< Autopilot-specific errors*/ int8_t battery_remaining; /*< Remaining battery energy: (0%: 0, 100%: 100), -1: autopilot estimate the remaining battery*/ } mavlink_sys_status_t; #define MAVLINK_MSG_ID_SYS_STATUS_LEN 31 #define MAVLINK_MSG_ID_SYS_STATUS_MIN_LEN 31 #define MAVLINK_MSG_ID_1_LEN 31 #define MAVLINK_MSG_ID_1_MIN_LEN 31 #define MAVLINK_MSG_ID_SYS_STATUS_CRC 124 #define MAVLINK_MSG_ID_1_CRC 124 #if MAVLINK_COMMAND_24BIT #define MAVLINK_MESSAGE_INFO_SYS_STATUS { \ 1, \ "SYS_STATUS", \ 13, \ { { "onboard_control_sensors_present", "0x%04x", MAVLINK_TYPE_UINT32_T, 0, 0, offsetof(mavlink_sys_status_t, onboard_control_sensors_present) }, \ { "onboard_control_sensors_enabled", "0x%04x", MAVLINK_TYPE_UINT32_T, 0, 4, offsetof(mavlink_sys_status_t, onboard_control_sensors_enabled) }, \ { "onboard_control_sensors_health", "0x%04x", MAVLINK_TYPE_UINT32_T, 0, 8, offsetof(mavlink_sys_status_t, onboard_control_sensors_health) }, \ { "load", NULL, MAVLINK_TYPE_UINT16_T, 0, 12, offsetof(mavlink_sys_status_t, load) }, \ { "voltage_battery", NULL, MAVLINK_TYPE_UINT16_T, 0, 14, offsetof(mavlink_sys_status_t, voltage_battery) }, \ { "current_battery", NULL, MAVLINK_TYPE_INT16_T, 0, 16, offsetof(mavlink_sys_status_t, current_battery) }, \ { "drop_rate_comm", NULL, MAVLINK_TYPE_UINT16_T, 0, 18, offsetof(mavlink_sys_status_t, drop_rate_comm) }, \ { "errors_comm", NULL, MAVLINK_TYPE_UINT16_T, 0, 20, offsetof(mavlink_sys_status_t, errors_comm) }, \ { "errors_count1", NULL, MAVLINK_TYPE_UINT16_T, 0, 22, offsetof(mavlink_sys_status_t, errors_count1) }, \ { "errors_count2", NULL, MAVLINK_TYPE_UINT16_T, 0, 24, offsetof(mavlink_sys_status_t, errors_count2) }, \ { "errors_count3", NULL, MAVLINK_TYPE_UINT16_T, 0, 26, offsetof(mavlink_sys_status_t, errors_count3) }, \ { "errors_count4", NULL, MAVLINK_TYPE_UINT16_T, 0, 28, offsetof(mavlink_sys_status_t, errors_count4) }, \ { "battery_remaining", NULL, MAVLINK_TYPE_INT8_T, 0, 30, offsetof(mavlink_sys_status_t, battery_remaining) }, \ } \ } #else #define MAVLINK_MESSAGE_INFO_SYS_STATUS { \ "SYS_STATUS", \ 13, \ { { "onboard_control_sensors_present", "0x%04x", MAVLINK_TYPE_UINT32_T, 0, 0, offsetof(mavlink_sys_status_t, onboard_control_sensors_present) }, \ { "onboard_control_sensors_enabled", "0x%04x", MAVLINK_TYPE_UINT32_T, 0, 4, offsetof(mavlink_sys_status_t, onboard_control_sensors_enabled) }, \ { "onboard_control_sensors_health", "0x%04x", MAVLINK_TYPE_UINT32_T, 0, 8, offsetof(mavlink_sys_status_t, onboard_control_sensors_health) }, \ { "load", NULL, MAVLINK_TYPE_UINT16_T, 0, 12, offsetof(mavlink_sys_status_t, load) }, \ { "voltage_battery", NULL, MAVLINK_TYPE_UINT16_T, 0, 14, offsetof(mavlink_sys_status_t, voltage_battery) }, \ { "current_battery", NULL, MAVLINK_TYPE_INT16_T, 0, 16, offsetof(mavlink_sys_status_t, current_battery) }, \ { "drop_rate_comm", NULL, MAVLINK_TYPE_UINT16_T, 0, 18, offsetof(mavlink_sys_status_t, drop_rate_comm) }, \ { "errors_comm", NULL, MAVLINK_TYPE_UINT16_T, 0, 20, offsetof(mavlink_sys_status_t, errors_comm) }, \ { "errors_count1", NULL, MAVLINK_TYPE_UINT16_T, 0, 22, offsetof(mavlink_sys_status_t, errors_count1) }, \ { "errors_count2", NULL, MAVLINK_TYPE_UINT16_T, 0, 24, offsetof(mavlink_sys_status_t, errors_count2) }, \ { "errors_count3", NULL, MAVLINK_TYPE_UINT16_T, 0, 26, offsetof(mavlink_sys_status_t, errors_count3) }, \ { "errors_count4", NULL, MAVLINK_TYPE_UINT16_T, 0, 28, offsetof(mavlink_sys_status_t, errors_count4) }, \ { "battery_remaining", NULL, MAVLINK_TYPE_INT8_T, 0, 30, offsetof(mavlink_sys_status_t, battery_remaining) }, \ } \ } #endif /** * @brief Pack a sys_status message * @param system_id ID of this system * @param component_id ID of this component (e.g. 200 for IMU) * @param msg The MAVLink message to compress the data into * * @param onboard_control_sensors_present Bitmask showing which onboard controllers and sensors are present. Value of 0: not present. Value of 1: present. Indices defined by ENUM MAV_SYS_STATUS_SENSOR * @param onboard_control_sensors_enabled Bitmask showing which onboard controllers and sensors are enabled: Value of 0: not enabled. Value of 1: enabled. Indices defined by ENUM MAV_SYS_STATUS_SENSOR * @param onboard_control_sensors_health Bitmask showing which onboard controllers and sensors are operational or have an error: Value of 0: not enabled. Value of 1: enabled. Indices defined by ENUM MAV_SYS_STATUS_SENSOR * @param load Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000 * @param voltage_battery Battery voltage, in millivolts (1 = 1 millivolt) * @param current_battery Battery current, in 10*milliamperes (1 = 10 milliampere), -1: autopilot does not measure the current * @param battery_remaining Remaining battery energy: (0%: 0, 100%: 100), -1: autopilot estimate the remaining battery * @param drop_rate_comm Communication drops in percent, (0%: 0, 100%: 10'000), (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV) * @param errors_comm Communication errors (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV) * @param errors_count1 Autopilot-specific errors * @param errors_count2 Autopilot-specific errors * @param errors_count3 Autopilot-specific errors * @param errors_count4 Autopilot-specific errors * @return length of the message in bytes (excluding serial stream start sign) */ static inline uint16_t mavlink_msg_sys_status_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, uint32_t onboard_control_sensors_present, uint32_t onboard_control_sensors_enabled, uint32_t onboard_control_sensors_health, uint16_t load, uint16_t voltage_battery, int16_t current_battery, int8_t battery_remaining, uint16_t drop_rate_comm, uint16_t errors_comm, uint16_t errors_count1, uint16_t errors_count2, uint16_t errors_count3, uint16_t errors_count4) { #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS char buf[MAVLINK_MSG_ID_SYS_STATUS_LEN]; _mav_put_uint32_t(buf, 0, onboard_control_sensors_present); _mav_put_uint32_t(buf, 4, onboard_control_sensors_enabled); _mav_put_uint32_t(buf, 8, onboard_control_sensors_health); _mav_put_uint16_t(buf, 12, load); _mav_put_uint16_t(buf, 14, voltage_battery); _mav_put_int16_t(buf, 16, current_battery); _mav_put_uint16_t(buf, 18, drop_rate_comm); _mav_put_uint16_t(buf, 20, errors_comm); _mav_put_uint16_t(buf, 22, errors_count1); _mav_put_uint16_t(buf, 24, errors_count2); _mav_put_uint16_t(buf, 26, errors_count3); _mav_put_uint16_t(buf, 28, errors_count4); _mav_put_int8_t(buf, 30, battery_remaining); memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_SYS_STATUS_LEN); #else mavlink_sys_status_t packet; packet.onboard_control_sensors_present = onboard_control_sensors_present; packet.onboard_control_sensors_enabled = onboard_control_sensors_enabled; packet.onboard_control_sensors_health = onboard_control_sensors_health; packet.load = load; packet.voltage_battery = voltage_battery; packet.current_battery = current_battery; packet.drop_rate_comm = drop_rate_comm; packet.errors_comm = errors_comm; packet.errors_count1 = errors_count1; packet.errors_count2 = errors_count2; packet.errors_count3 = errors_count3; packet.errors_count4 = errors_count4; packet.battery_remaining = battery_remaining; memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_SYS_STATUS_LEN); #endif msg->msgid = MAVLINK_MSG_ID_SYS_STATUS; return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_SYS_STATUS_MIN_LEN, MAVLINK_MSG_ID_SYS_STATUS_LEN, MAVLINK_MSG_ID_SYS_STATUS_CRC); } /** * @brief Pack a sys_status message on a channel * @param system_id ID of this system * @param component_id ID of this component (e.g. 200 for IMU) * @param chan The MAVLink channel this message will be sent over * @param msg The MAVLink message to compress the data into * @param onboard_control_sensors_present Bitmask showing which onboard controllers and sensors are present. Value of 0: not present. Value of 1: present. Indices defined by ENUM MAV_SYS_STATUS_SENSOR * @param onboard_control_sensors_enabled Bitmask showing which onboard controllers and sensors are enabled: Value of 0: not enabled. Value of 1: enabled. Indices defined by ENUM MAV_SYS_STATUS_SENSOR * @param onboard_control_sensors_health Bitmask showing which onboard controllers and sensors are operational or have an error: Value of 0: not enabled. Value of 1: enabled. Indices defined by ENUM MAV_SYS_STATUS_SENSOR * @param load Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000 * @param voltage_battery Battery voltage, in millivolts (1 = 1 millivolt) * @param current_battery Battery current, in 10*milliamperes (1 = 10 milliampere), -1: autopilot does not measure the current * @param battery_remaining Remaining battery energy: (0%: 0, 100%: 100), -1: autopilot estimate the remaining battery * @param drop_rate_comm Communication drops in percent, (0%: 0, 100%: 10'000), (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV) * @param errors_comm Communication errors (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV) * @param errors_count1 Autopilot-specific errors * @param errors_count2 Autopilot-specific errors * @param errors_count3 Autopilot-specific errors * @param errors_count4 Autopilot-specific errors * @return length of the message in bytes (excluding serial stream start sign) */ static inline uint16_t mavlink_msg_sys_status_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, uint32_t onboard_control_sensors_present,uint32_t onboard_control_sensors_enabled,uint32_t onboard_control_sensors_health,uint16_t load,uint16_t voltage_battery,int16_t current_battery,int8_t battery_remaining,uint16_t drop_rate_comm,uint16_t errors_comm,uint16_t errors_count1,uint16_t errors_count2,uint16_t errors_count3,uint16_t errors_count4) { #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS char buf[MAVLINK_MSG_ID_SYS_STATUS_LEN]; _mav_put_uint32_t(buf, 0, onboard_control_sensors_present); _mav_put_uint32_t(buf, 4, onboard_control_sensors_enabled); _mav_put_uint32_t(buf, 8, onboard_control_sensors_health); _mav_put_uint16_t(buf, 12, load); _mav_put_uint16_t(buf, 14, voltage_battery); _mav_put_int16_t(buf, 16, current_battery); _mav_put_uint16_t(buf, 18, drop_rate_comm); _mav_put_uint16_t(buf, 20, errors_comm); _mav_put_uint16_t(buf, 22, errors_count1); _mav_put_uint16_t(buf, 24, errors_count2); _mav_put_uint16_t(buf, 26, errors_count3); _mav_put_uint16_t(buf, 28, errors_count4); _mav_put_int8_t(buf, 30, battery_remaining); memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_SYS_STATUS_LEN); #else mavlink_sys_status_t packet; packet.onboard_control_sensors_present = onboard_control_sensors_present; packet.onboard_control_sensors_enabled = onboard_control_sensors_enabled; packet.onboard_control_sensors_health = onboard_control_sensors_health; packet.load = load; packet.voltage_battery = voltage_battery; packet.current_battery = current_battery; packet.drop_rate_comm = drop_rate_comm; packet.errors_comm = errors_comm; packet.errors_count1 = errors_count1; packet.errors_count2 = errors_count2; packet.errors_count3 = errors_count3; packet.errors_count4 = errors_count4; packet.battery_remaining = battery_remaining; memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_SYS_STATUS_LEN); #endif msg->msgid = MAVLINK_MSG_ID_SYS_STATUS; return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_SYS_STATUS_MIN_LEN, MAVLINK_MSG_ID_SYS_STATUS_LEN, MAVLINK_MSG_ID_SYS_STATUS_CRC); } /** * @brief Encode a sys_status struct * * @param system_id ID of this system * @param component_id ID of this component (e.g. 200 for IMU) * @param msg The MAVLink message to compress the data into * @param sys_status C-struct to read the message contents from */ static inline uint16_t mavlink_msg_sys_status_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_sys_status_t* sys_status) { return mavlink_msg_sys_status_pack(system_id, component_id, msg, sys_status->onboard_control_sensors_present, sys_status->onboard_control_sensors_enabled, sys_status->onboard_control_sensors_health, sys_status->load, sys_status->voltage_battery, sys_status->current_battery, sys_status->battery_remaining, sys_status->drop_rate_comm, sys_status->errors_comm, sys_status->errors_count1, sys_status->errors_count2, sys_status->errors_count3, sys_status->errors_count4); } /** * @brief Encode a sys_status struct on a channel * * @param system_id ID of this system * @param component_id ID of this component (e.g. 200 for IMU) * @param chan The MAVLink channel this message will be sent over * @param msg The MAVLink message to compress the data into * @param sys_status C-struct to read the message contents from */ static inline uint16_t mavlink_msg_sys_status_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_sys_status_t* sys_status) { return mavlink_msg_sys_status_pack_chan(system_id, component_id, chan, msg, sys_status->onboard_control_sensors_present, sys_status->onboard_control_sensors_enabled, sys_status->onboard_control_sensors_health, sys_status->load, sys_status->voltage_battery, sys_status->current_battery, sys_status->battery_remaining, sys_status->drop_rate_comm, sys_status->errors_comm, sys_status->errors_count1, sys_status->errors_count2, sys_status->errors_count3, sys_status->errors_count4); } /** * @brief Send a sys_status message * @param chan MAVLink channel to send the message * * @param onboard_control_sensors_present Bitmask showing which onboard controllers and sensors are present. Value of 0: not present. Value of 1: present. Indices defined by ENUM MAV_SYS_STATUS_SENSOR * @param onboard_control_sensors_enabled Bitmask showing which onboard controllers and sensors are enabled: Value of 0: not enabled. Value of 1: enabled. Indices defined by ENUM MAV_SYS_STATUS_SENSOR * @param onboard_control_sensors_health Bitmask showing which onboard controllers and sensors are operational or have an error: Value of 0: not enabled. Value of 1: enabled. Indices defined by ENUM MAV_SYS_STATUS_SENSOR * @param load Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000 * @param voltage_battery Battery voltage, in millivolts (1 = 1 millivolt) * @param current_battery Battery current, in 10*milliamperes (1 = 10 milliampere), -1: autopilot does not measure the current * @param battery_remaining Remaining battery energy: (0%: 0, 100%: 100), -1: autopilot estimate the remaining battery * @param drop_rate_comm Communication drops in percent, (0%: 0, 100%: 10'000), (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV) * @param errors_comm Communication errors (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV) * @param errors_count1 Autopilot-specific errors * @param errors_count2 Autopilot-specific errors * @param errors_count3 Autopilot-specific errors * @param errors_count4 Autopilot-specific errors */ #ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS static inline void mavlink_msg_sys_status_send(mavlink_channel_t chan, uint32_t onboard_control_sensors_present, uint32_t onboard_control_sensors_enabled, uint32_t onboard_control_sensors_health, uint16_t load, uint16_t voltage_battery, int16_t current_battery, int8_t battery_remaining, uint16_t drop_rate_comm, uint16_t errors_comm, uint16_t errors_count1, uint16_t errors_count2, uint16_t errors_count3, uint16_t errors_count4) { #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS char buf[MAVLINK_MSG_ID_SYS_STATUS_LEN]; _mav_put_uint32_t(buf, 0, onboard_control_sensors_present); _mav_put_uint32_t(buf, 4, onboard_control_sensors_enabled); _mav_put_uint32_t(buf, 8, onboard_control_sensors_health); _mav_put_uint16_t(buf, 12, load); _mav_put_uint16_t(buf, 14, voltage_battery); _mav_put_int16_t(buf, 16, current_battery); _mav_put_uint16_t(buf, 18, drop_rate_comm); _mav_put_uint16_t(buf, 20, errors_comm); _mav_put_uint16_t(buf, 22, errors_count1); _mav_put_uint16_t(buf, 24, errors_count2); _mav_put_uint16_t(buf, 26, errors_count3); _mav_put_uint16_t(buf, 28, errors_count4); _mav_put_int8_t(buf, 30, battery_remaining); _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, buf, MAVLINK_MSG_ID_SYS_STATUS_MIN_LEN, MAVLINK_MSG_ID_SYS_STATUS_LEN, MAVLINK_MSG_ID_SYS_STATUS_CRC); #else mavlink_sys_status_t packet; packet.onboard_control_sensors_present = onboard_control_sensors_present; packet.onboard_control_sensors_enabled = onboard_control_sensors_enabled; packet.onboard_control_sensors_health = onboard_control_sensors_health; packet.load = load; packet.voltage_battery = voltage_battery; packet.current_battery = current_battery; packet.drop_rate_comm = drop_rate_comm; packet.errors_comm = errors_comm; packet.errors_count1 = errors_count1; packet.errors_count2 = errors_count2; packet.errors_count3 = errors_count3; packet.errors_count4 = errors_count4; packet.battery_remaining = battery_remaining; _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, (const char *)&packet, MAVLINK_MSG_ID_SYS_STATUS_MIN_LEN, MAVLINK_MSG_ID_SYS_STATUS_LEN, MAVLINK_MSG_ID_SYS_STATUS_CRC); #endif } /** * @brief Send a sys_status message * @param chan MAVLink channel to send the message * @param struct The MAVLink struct to serialize */ static inline void mavlink_msg_sys_status_send_struct(mavlink_channel_t chan, const mavlink_sys_status_t* sys_status) { #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS mavlink_msg_sys_status_send(chan, sys_status->onboard_control_sensors_present, sys_status->onboard_control_sensors_enabled, sys_status->onboard_control_sensors_health, sys_status->load, sys_status->voltage_battery, sys_status->current_battery, sys_status->battery_remaining, sys_status->drop_rate_comm, sys_status->errors_comm, sys_status->errors_count1, sys_status->errors_count2, sys_status->errors_count3, sys_status->errors_count4); #else _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, (const char *)sys_status, MAVLINK_MSG_ID_SYS_STATUS_MIN_LEN, MAVLINK_MSG_ID_SYS_STATUS_LEN, MAVLINK_MSG_ID_SYS_STATUS_CRC); #endif } #if MAVLINK_MSG_ID_SYS_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN /* This varient of _send() can be used to save stack space by re-using memory from the receive buffer. The caller provides a mavlink_message_t which is the size of a full mavlink message. This is usually the receive buffer for the channel, and allows a reply to an incoming message with minimum stack space usage. */ static inline void mavlink_msg_sys_status_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint32_t onboard_control_sensors_present, uint32_t onboard_control_sensors_enabled, uint32_t onboard_control_sensors_health, uint16_t load, uint16_t voltage_battery, int16_t current_battery, int8_t battery_remaining, uint16_t drop_rate_comm, uint16_t errors_comm, uint16_t errors_count1, uint16_t errors_count2, uint16_t errors_count3, uint16_t errors_count4) { #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS char *buf = (char *)msgbuf; _mav_put_uint32_t(buf, 0, onboard_control_sensors_present); _mav_put_uint32_t(buf, 4, onboard_control_sensors_enabled); _mav_put_uint32_t(buf, 8, onboard_control_sensors_health); _mav_put_uint16_t(buf, 12, load); _mav_put_uint16_t(buf, 14, voltage_battery); _mav_put_int16_t(buf, 16, current_battery); _mav_put_uint16_t(buf, 18, drop_rate_comm); _mav_put_uint16_t(buf, 20, errors_comm); _mav_put_uint16_t(buf, 22, errors_count1); _mav_put_uint16_t(buf, 24, errors_count2); _mav_put_uint16_t(buf, 26, errors_count3); _mav_put_uint16_t(buf, 28, errors_count4); _mav_put_int8_t(buf, 30, battery_remaining); _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, buf, MAVLINK_MSG_ID_SYS_STATUS_MIN_LEN, MAVLINK_MSG_ID_SYS_STATUS_LEN, MAVLINK_MSG_ID_SYS_STATUS_CRC); #else mavlink_sys_status_t *packet = (mavlink_sys_status_t *)msgbuf; packet->onboard_control_sensors_present = onboard_control_sensors_present; packet->onboard_control_sensors_enabled = onboard_control_sensors_enabled; packet->onboard_control_sensors_health = onboard_control_sensors_health; packet->load = load; packet->voltage_battery = voltage_battery; packet->current_battery = current_battery; packet->drop_rate_comm = drop_rate_comm; packet->errors_comm = errors_comm; packet->errors_count1 = errors_count1; packet->errors_count2 = errors_count2; packet->errors_count3 = errors_count3; packet->errors_count4 = errors_count4; packet->battery_remaining = battery_remaining; _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_SYS_STATUS, (const char *)packet, MAVLINK_MSG_ID_SYS_STATUS_MIN_LEN, MAVLINK_MSG_ID_SYS_STATUS_LEN, MAVLINK_MSG_ID_SYS_STATUS_CRC); #endif } #endif #endif // MESSAGE SYS_STATUS UNPACKING /** * @brief Get field onboard_control_sensors_present from sys_status message * * @return Bitmask showing which onboard controllers and sensors are present. Value of 0: not present. Value of 1: present. Indices defined by ENUM MAV_SYS_STATUS_SENSOR */ static inline uint32_t mavlink_msg_sys_status_get_onboard_control_sensors_present(const mavlink_message_t* msg) { return _MAV_RETURN_uint32_t(msg, 0); } /** * @brief Get field onboard_control_sensors_enabled from sys_status message * * @return Bitmask showing which onboard controllers and sensors are enabled: Value of 0: not enabled. Value of 1: enabled. Indices defined by ENUM MAV_SYS_STATUS_SENSOR */ static inline uint32_t mavlink_msg_sys_status_get_onboard_control_sensors_enabled(const mavlink_message_t* msg) { return _MAV_RETURN_uint32_t(msg, 4); } /** * @brief Get field onboard_control_sensors_health from sys_status message * * @return Bitmask showing which onboard controllers and sensors are operational or have an error: Value of 0: not enabled. Value of 1: enabled. Indices defined by ENUM MAV_SYS_STATUS_SENSOR */ static inline uint32_t mavlink_msg_sys_status_get_onboard_control_sensors_health(const mavlink_message_t* msg) { return _MAV_RETURN_uint32_t(msg, 8); } /** * @brief Get field load from sys_status message * * @return Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000 */ static inline uint16_t mavlink_msg_sys_status_get_load(const mavlink_message_t* msg) { return _MAV_RETURN_uint16_t(msg, 12); } /** * @brief Get field voltage_battery from sys_status message * * @return Battery voltage, in millivolts (1 = 1 millivolt) */ static inline uint16_t mavlink_msg_sys_status_get_voltage_battery(const mavlink_message_t* msg) { return _MAV_RETURN_uint16_t(msg, 14); } /** * @brief Get field current_battery from sys_status message * * @return Battery current, in 10*milliamperes (1 = 10 milliampere), -1: autopilot does not measure the current */ static inline int16_t mavlink_msg_sys_status_get_current_battery(const mavlink_message_t* msg) { return _MAV_RETURN_int16_t(msg, 16); } /** * @brief Get field battery_remaining from sys_status message * * @return Remaining battery energy: (0%: 0, 100%: 100), -1: autopilot estimate the remaining battery */ static inline int8_t mavlink_msg_sys_status_get_battery_remaining(const mavlink_message_t* msg) { return _MAV_RETURN_int8_t(msg, 30); } /** * @brief Get field drop_rate_comm from sys_status message * * @return Communication drops in percent, (0%: 0, 100%: 10'000), (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV) */ static inline uint16_t mavlink_msg_sys_status_get_drop_rate_comm(const mavlink_message_t* msg) { return _MAV_RETURN_uint16_t(msg, 18); } /** * @brief Get field errors_comm from sys_status message * * @return Communication errors (UART, I2C, SPI, CAN), dropped packets on all links (packets that were corrupted on reception on the MAV) */ static inline uint16_t mavlink_msg_sys_status_get_errors_comm(const mavlink_message_t* msg) { return _MAV_RETURN_uint16_t(msg, 20); } /** * @brief Get field errors_count1 from sys_status message * * @return Autopilot-specific errors */ static inline uint16_t mavlink_msg_sys_status_get_errors_count1(const mavlink_message_t* msg) { return _MAV_RETURN_uint16_t(msg, 22); } /** * @brief Get field errors_count2 from sys_status message * * @return Autopilot-specific errors */ static inline uint16_t mavlink_msg_sys_status_get_errors_count2(const mavlink_message_t* msg) { return _MAV_RETURN_uint16_t(msg, 24); } /** * @brief Get field errors_count3 from sys_status message * * @return Autopilot-specific errors */ static inline uint16_t mavlink_msg_sys_status_get_errors_count3(const mavlink_message_t* msg) { return _MAV_RETURN_uint16_t(msg, 26); } /** * @brief Get field errors_count4 from sys_status message * * @return Autopilot-specific errors */ static inline uint16_t mavlink_msg_sys_status_get_errors_count4(const mavlink_message_t* msg) { return _MAV_RETURN_uint16_t(msg, 28); } /** * @brief Decode a sys_status message into a struct * * @param msg The message to decode * @param sys_status C-struct to decode the message contents into */ static inline void mavlink_msg_sys_status_decode(const mavlink_message_t* msg, mavlink_sys_status_t* sys_status) { #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS sys_status->onboard_control_sensors_present = mavlink_msg_sys_status_get_onboard_control_sensors_present(msg); sys_status->onboard_control_sensors_enabled = mavlink_msg_sys_status_get_onboard_control_sensors_enabled(msg); sys_status->onboard_control_sensors_health = mavlink_msg_sys_status_get_onboard_control_sensors_health(msg); sys_status->load = mavlink_msg_sys_status_get_load(msg); sys_status->voltage_battery = mavlink_msg_sys_status_get_voltage_battery(msg); sys_status->current_battery = mavlink_msg_sys_status_get_current_battery(msg); sys_status->drop_rate_comm = mavlink_msg_sys_status_get_drop_rate_comm(msg); sys_status->errors_comm = mavlink_msg_sys_status_get_errors_comm(msg); sys_status->errors_count1 = mavlink_msg_sys_status_get_errors_count1(msg); sys_status->errors_count2 = mavlink_msg_sys_status_get_errors_count2(msg); sys_status->errors_count3 = mavlink_msg_sys_status_get_errors_count3(msg); sys_status->errors_count4 = mavlink_msg_sys_status_get_errors_count4(msg); sys_status->battery_remaining = mavlink_msg_sys_status_get_battery_remaining(msg); #else uint8_t len = msg->len < MAVLINK_MSG_ID_SYS_STATUS_LEN? msg->len : MAVLINK_MSG_ID_SYS_STATUS_LEN; memset(sys_status, 0, MAVLINK_MSG_ID_SYS_STATUS_LEN); memcpy(sys_status, _MAV_PAYLOAD(msg), len); #endif }