source: flair-src/branches/mavlink/tools/Controller/Mavlink/src/mavlink_generated_messages/common/mavlink_msg_message_interval.h @ 46

Last change on this file since 46 was 46, checked in by Thomas Fuhrmann, 5 years ago

Add the mavlink branch

File size: 10.4 KB
Line 
1// MESSAGE MESSAGE_INTERVAL PACKING
2
3#define MAVLINK_MSG_ID_MESSAGE_INTERVAL 244
4
5MAVPACKED(
6typedef struct __mavlink_message_interval_t {
7 int32_t interval_us; /*< The interval between two messages, in microseconds. A value of -1 indicates this stream is disabled, 0 indicates it is not available, > 0 indicates the interval at which it is sent.*/
8 uint16_t message_id; /*< The ID of the requested MAVLink message. v1.0 is limited to 254 messages.*/
9}) mavlink_message_interval_t;
10
11#define MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN 6
12#define MAVLINK_MSG_ID_MESSAGE_INTERVAL_MIN_LEN 6
13#define MAVLINK_MSG_ID_244_LEN 6
14#define MAVLINK_MSG_ID_244_MIN_LEN 6
15
16#define MAVLINK_MSG_ID_MESSAGE_INTERVAL_CRC 95
17#define MAVLINK_MSG_ID_244_CRC 95
18
19
20
21#if MAVLINK_COMMAND_24BIT
22#define MAVLINK_MESSAGE_INFO_MESSAGE_INTERVAL { \
23        244, \
24        "MESSAGE_INTERVAL", \
25        2, \
26        {  { "interval_us", NULL, MAVLINK_TYPE_INT32_T, 0, 0, offsetof(mavlink_message_interval_t, interval_us) }, \
27         { "message_id", NULL, MAVLINK_TYPE_UINT16_T, 0, 4, offsetof(mavlink_message_interval_t, message_id) }, \
28         } \
29}
30#else
31#define MAVLINK_MESSAGE_INFO_MESSAGE_INTERVAL { \
32        "MESSAGE_INTERVAL", \
33        2, \
34        {  { "interval_us", NULL, MAVLINK_TYPE_INT32_T, 0, 0, offsetof(mavlink_message_interval_t, interval_us) }, \
35         { "message_id", NULL, MAVLINK_TYPE_UINT16_T, 0, 4, offsetof(mavlink_message_interval_t, message_id) }, \
36         } \
37}
38#endif
39
40/**
41 * @brief Pack a message_interval message
42 * @param system_id ID of this system
43 * @param component_id ID of this component (e.g. 200 for IMU)
44 * @param msg The MAVLink message to compress the data into
45 *
46 * @param message_id The ID of the requested MAVLink message. v1.0 is limited to 254 messages.
47 * @param interval_us The interval between two messages, in microseconds. A value of -1 indicates this stream is disabled, 0 indicates it is not available, > 0 indicates the interval at which it is sent.
48 * @return length of the message in bytes (excluding serial stream start sign)
49 */
50static inline uint16_t mavlink_msg_message_interval_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg,
51                                                       uint16_t message_id, int32_t interval_us)
52{
53#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
54        char buf[MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN];
55        _mav_put_int32_t(buf, 0, interval_us);
56        _mav_put_uint16_t(buf, 4, message_id);
57
58        memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN);
59#else
60        mavlink_message_interval_t packet;
61        packet.interval_us = interval_us;
62        packet.message_id = message_id;
63
64        memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN);
65#endif
66
67        msg->msgid = MAVLINK_MSG_ID_MESSAGE_INTERVAL;
68    return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_MESSAGE_INTERVAL_MIN_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_CRC);
69}
70
71/**
72 * @brief Pack a message_interval message on a channel
73 * @param system_id ID of this system
74 * @param component_id ID of this component (e.g. 200 for IMU)
75 * @param chan The MAVLink channel this message will be sent over
76 * @param msg The MAVLink message to compress the data into
77 * @param message_id The ID of the requested MAVLink message. v1.0 is limited to 254 messages.
78 * @param interval_us The interval between two messages, in microseconds. A value of -1 indicates this stream is disabled, 0 indicates it is not available, > 0 indicates the interval at which it is sent.
79 * @return length of the message in bytes (excluding serial stream start sign)
80 */
81static inline uint16_t mavlink_msg_message_interval_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan,
82                                                           mavlink_message_t* msg,
83                                                           uint16_t message_id,int32_t interval_us)
84{
85#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
86        char buf[MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN];
87        _mav_put_int32_t(buf, 0, interval_us);
88        _mav_put_uint16_t(buf, 4, message_id);
89
90        memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN);
91#else
92        mavlink_message_interval_t packet;
93        packet.interval_us = interval_us;
94        packet.message_id = message_id;
95
96        memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN);
97#endif
98
99        msg->msgid = MAVLINK_MSG_ID_MESSAGE_INTERVAL;
100    return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_MESSAGE_INTERVAL_MIN_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_CRC);
101}
102
103/**
104 * @brief Encode a message_interval struct
105 *
106 * @param system_id ID of this system
107 * @param component_id ID of this component (e.g. 200 for IMU)
108 * @param msg The MAVLink message to compress the data into
109 * @param message_interval C-struct to read the message contents from
110 */
111static inline uint16_t mavlink_msg_message_interval_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_message_interval_t* message_interval)
112{
113        return mavlink_msg_message_interval_pack(system_id, component_id, msg, message_interval->message_id, message_interval->interval_us);
114}
115
116/**
117 * @brief Encode a message_interval struct on a channel
118 *
119 * @param system_id ID of this system
120 * @param component_id ID of this component (e.g. 200 for IMU)
121 * @param chan The MAVLink channel this message will be sent over
122 * @param msg The MAVLink message to compress the data into
123 * @param message_interval C-struct to read the message contents from
124 */
125static inline uint16_t mavlink_msg_message_interval_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_message_interval_t* message_interval)
126{
127        return mavlink_msg_message_interval_pack_chan(system_id, component_id, chan, msg, message_interval->message_id, message_interval->interval_us);
128}
129
130/**
131 * @brief Send a message_interval message
132 * @param chan MAVLink channel to send the message
133 *
134 * @param message_id The ID of the requested MAVLink message. v1.0 is limited to 254 messages.
135 * @param interval_us The interval between two messages, in microseconds. A value of -1 indicates this stream is disabled, 0 indicates it is not available, > 0 indicates the interval at which it is sent.
136 */
137#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS
138
139static inline void mavlink_msg_message_interval_send(mavlink_channel_t chan, uint16_t message_id, int32_t interval_us)
140{
141#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
142        char buf[MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN];
143        _mav_put_int32_t(buf, 0, interval_us);
144        _mav_put_uint16_t(buf, 4, message_id);
145
146    _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MESSAGE_INTERVAL, buf, MAVLINK_MSG_ID_MESSAGE_INTERVAL_MIN_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_CRC);
147#else
148        mavlink_message_interval_t packet;
149        packet.interval_us = interval_us;
150        packet.message_id = message_id;
151
152    _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MESSAGE_INTERVAL, (const char *)&packet, MAVLINK_MSG_ID_MESSAGE_INTERVAL_MIN_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_CRC);
153#endif
154}
155
156/**
157 * @brief Send a message_interval message
158 * @param chan MAVLink channel to send the message
159 * @param struct The MAVLink struct to serialize
160 */
161static inline void mavlink_msg_message_interval_send_struct(mavlink_channel_t chan, const mavlink_message_interval_t* message_interval)
162{
163#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
164    mavlink_msg_message_interval_send(chan, message_interval->message_id, message_interval->interval_us);
165#else
166    _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MESSAGE_INTERVAL, (const char *)message_interval, MAVLINK_MSG_ID_MESSAGE_INTERVAL_MIN_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_CRC);
167#endif
168}
169
170#if MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN <= MAVLINK_MAX_PAYLOAD_LEN
171/*
172  This varient of _send() can be used to save stack space by re-using
173  memory from the receive buffer.  The caller provides a
174  mavlink_message_t which is the size of a full mavlink message. This
175  is usually the receive buffer for the channel, and allows a reply to an
176  incoming message with minimum stack space usage.
177 */
178static inline void mavlink_msg_message_interval_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan,  uint16_t message_id, int32_t interval_us)
179{
180#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
181        char *buf = (char *)msgbuf;
182        _mav_put_int32_t(buf, 0, interval_us);
183        _mav_put_uint16_t(buf, 4, message_id);
184
185    _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MESSAGE_INTERVAL, buf, MAVLINK_MSG_ID_MESSAGE_INTERVAL_MIN_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_CRC);
186#else
187        mavlink_message_interval_t *packet = (mavlink_message_interval_t *)msgbuf;
188        packet->interval_us = interval_us;
189        packet->message_id = message_id;
190
191    _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MESSAGE_INTERVAL, (const char *)packet, MAVLINK_MSG_ID_MESSAGE_INTERVAL_MIN_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN, MAVLINK_MSG_ID_MESSAGE_INTERVAL_CRC);
192#endif
193}
194#endif
195
196#endif
197
198// MESSAGE MESSAGE_INTERVAL UNPACKING
199
200
201/**
202 * @brief Get field message_id from message_interval message
203 *
204 * @return The ID of the requested MAVLink message. v1.0 is limited to 254 messages.
205 */
206static inline uint16_t mavlink_msg_message_interval_get_message_id(const mavlink_message_t* msg)
207{
208        return _MAV_RETURN_uint16_t(msg,  4);
209}
210
211/**
212 * @brief Get field interval_us from message_interval message
213 *
214 * @return The interval between two messages, in microseconds. A value of -1 indicates this stream is disabled, 0 indicates it is not available, > 0 indicates the interval at which it is sent.
215 */
216static inline int32_t mavlink_msg_message_interval_get_interval_us(const mavlink_message_t* msg)
217{
218        return _MAV_RETURN_int32_t(msg,  0);
219}
220
221/**
222 * @brief Decode a message_interval message into a struct
223 *
224 * @param msg The message to decode
225 * @param message_interval C-struct to decode the message contents into
226 */
227static inline void mavlink_msg_message_interval_decode(const mavlink_message_t* msg, mavlink_message_interval_t* message_interval)
228{
229#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
230        message_interval->interval_us = mavlink_msg_message_interval_get_interval_us(msg);
231        message_interval->message_id = mavlink_msg_message_interval_get_message_id(msg);
232#else
233        uint8_t len = msg->len < MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN? msg->len : MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN;
234        memset(message_interval, 0, MAVLINK_MSG_ID_MESSAGE_INTERVAL_LEN);
235        memcpy(message_interval, _MAV_PAYLOAD(msg), len);
236#endif
237}
Note: See TracBrowser for help on using the repository browser.