source: flair-src/trunk/lib/Doxyfile.in@ 130

Last change on this file since 130 was 22, checked in by Sanahuja Guillaume, 8 years ago

m

File size: 80.2 KB
Line 
1# Doxyfile 1.8.4
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8# TAG = value [value, ...]
9# For lists items can also be appended using:
10# TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# This tag specifies the encoding used for all characters in the config file
18# that follow. The default is UTF-8 which is also the encoding used for all
19# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20# iconv built into libc) for the transcoding. See
21# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23DOXYFILE_ENCODING = UTF-8
24
25# The PROJECT_NAME tag is a single word (or sequence of words) that should
26# identify the project. Note that if you do not use Doxywizard you need
27# to put quotes around the project name if it contains spaces.
28
29PROJECT_NAME = Flair
30
31# The PROJECT_NUMBER tag can be used to enter a project or revision number.
32# This could be handy for archiving the generated documentation or
33# if some version control system is used.
34
35PROJECT_NUMBER =
36
37# Using the PROJECT_BRIEF tag one can provide an optional one line description
38# for a project that appears at the top of each page and should give viewer
39# a quick idea about the purpose of the project. Keep the description short.
40
41PROJECT_BRIEF = "Framework Libre Air"
42
43# With the PROJECT_LOGO tag one can specify an logo or icon that is
44# included in the documentation. The maximum height of the logo should not
45# exceed 55 pixels and the maximum width should not exceed 200 pixels.
46# Doxygen will copy the logo to the output directory.
47
48PROJECT_LOGO = $(FLAIR_ROOT)/flair-src/lib/logo_hds.png
49
50# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
51# base path where the generated documentation will be put.
52# If a relative path is entered, it will be relative to the location
53# where doxygen was started. If left blank the current directory will be used.
54
55OUTPUT_DIRECTORY = $(FLAIR_ROOT)/flair-dev/doc
56
57# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
58# 4096 sub-directories (in 2 levels) under the output directory of each output
59# format and will distribute the generated files over these directories.
60# Enabling this option can be useful when feeding doxygen a huge amount of
61# source files, where putting all generated files in the same directory would
62# otherwise cause performance problems for the file system.
63
64CREATE_SUBDIRS = NO
65
66# The OUTPUT_LANGUAGE tag is used to specify the language in which all
67# documentation generated by doxygen is written. Doxygen will use this
68# information to generate all constant output in the proper language.
69# The default language is English, other supported languages are:
70# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
71# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
72# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
73# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian,
74# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic,
75# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
76
77OUTPUT_LANGUAGE = English
78
79# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
80# include brief member descriptions after the members that are listed in
81# the file and class documentation (similar to JavaDoc).
82# Set to NO to disable this.
83
84BRIEF_MEMBER_DESC = YES
85
86# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
87# the brief description of a member or function before the detailed description.
88# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
89# brief descriptions will be completely suppressed.
90
91REPEAT_BRIEF = YES
92
93# This tag implements a quasi-intelligent brief description abbreviator
94# that is used to form the text in various listings. Each string
95# in this list, if found as the leading text of the brief description, will be
96# stripped from the text and the result after processing the whole list, is
97# used as the annotated text. Otherwise, the brief description is used as-is.
98# If left blank, the following values are used ("$name" is automatically
99# replaced with the name of the entity): "The $name class" "The $name widget"
100# "The $name file" "is" "provides" "specifies" "contains"
101# "represents" "a" "an" "the"
102
103ABBREVIATE_BRIEF = "The $name class" \
104 "The $name widget" \
105 "The $name file" \
106 is \
107 provides \
108 specifies \
109 contains \
110 represents \
111 a \
112 an \
113 the
114
115# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
116# Doxygen will generate a detailed section even if there is only a brief
117# description.
118
119ALWAYS_DETAILED_SEC = YES
120
121# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
122# inherited members of a class in the documentation of that class as if those
123# members were ordinary class members. Constructors, destructors and assignment
124# operators of the base classes will not be shown.
125
126INLINE_INHERITED_MEMB = NO
127
128# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
129# path before files name in the file list and in the header files. If set
130# to NO the shortest path that makes the file name unique will be used.
131
132FULL_PATH_NAMES = NO
133
134# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
135# can be used to strip a user-defined part of the path. Stripping is
136# only done if one of the specified strings matches the left-hand part of
137# the path. The tag can be used to show relative paths in the file list.
138# If left blank the directory from which doxygen is run is used as the
139# path to strip. Note that you specify absolute paths here, but also
140# relative paths, which will be relative from the directory where doxygen is
141# started.
142
143STRIP_FROM_PATH =
144
145# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
146# the path mentioned in the documentation of a class, which tells
147# the reader which header file to include in order to use a class.
148# If left blank only the name of the header file containing the class
149# definition is used. Otherwise one should specify the include paths that
150# are normally passed to the compiler using the -I flag.
151
152STRIP_FROM_INC_PATH =
153
154# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
155# (but less readable) file names. This can be useful if your file system
156# doesn't support long names like on DOS, Mac, or CD-ROM.
157
158SHORT_NAMES = NO
159
160# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
161# will interpret the first line (until the first dot) of a JavaDoc-style
162# comment as the brief description. If set to NO, the JavaDoc
163# comments will behave just like regular Qt-style comments
164# (thus requiring an explicit @brief command for a brief description.)
165
166JAVADOC_AUTOBRIEF = NO
167
168# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
169# interpret the first line (until the first dot) of a Qt-style
170# comment as the brief description. If set to NO, the comments
171# will behave just like regular Qt-style comments (thus requiring
172# an explicit \brief command for a brief description.)
173
174QT_AUTOBRIEF = NO
175
176# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
177# treat a multi-line C++ special comment block (i.e. a block of //! or ///
178# comments) as a brief description. This used to be the default behaviour.
179# The new default is to treat a multi-line C++ comment block as a detailed
180# description. Set this tag to YES if you prefer the old behaviour instead.
181
182MULTILINE_CPP_IS_BRIEF = NO
183
184# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
185# member inherits the documentation from any documented member that it
186# re-implements.
187
188INHERIT_DOCS = YES
189
190# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
191# a new page for each member. If set to NO, the documentation of a member will
192# be part of the file/class/namespace that contains it.
193
194SEPARATE_MEMBER_PAGES = NO
195
196# The TAB_SIZE tag can be used to set the number of spaces in a tab.
197# Doxygen uses this value to replace tabs by spaces in code fragments.
198
199TAB_SIZE = 8
200
201# This tag can be used to specify a number of aliases that acts
202# as commands in the documentation. An alias has the form "name=value".
203# For example adding "sideeffect=\par Side Effects:\n" will allow you to
204# put the command \sideeffect (or @sideeffect) in the documentation, which
205# will result in a user-defined paragraph with heading "Side Effects:".
206# You can put \n's in the value part of an alias to insert newlines.
207
208ALIASES =
209
210# This tag can be used to specify a number of word-keyword mappings (TCL only).
211# A mapping has the form "name=value". For example adding
212# "class=itcl::class" will allow you to use the command class in the
213# itcl::class meaning.
214
215TCL_SUBST =
216
217# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
218# sources only. Doxygen will then generate output that is more tailored for C.
219# For instance, some of the names that are used will be different. The list
220# of all members will be omitted, etc.
221
222OPTIMIZE_OUTPUT_FOR_C = NO
223
224# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
225# sources only. Doxygen will then generate output that is more tailored for
226# Java. For instance, namespaces will be presented as packages, qualified
227# scopes will look different, etc.
228
229OPTIMIZE_OUTPUT_JAVA = NO
230
231# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
232# sources only. Doxygen will then generate output that is more tailored for
233# Fortran.
234
235OPTIMIZE_FOR_FORTRAN = NO
236
237# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
238# sources. Doxygen will then generate output that is tailored for
239# VHDL.
240
241OPTIMIZE_OUTPUT_VHDL = NO
242
243# Doxygen selects the parser to use depending on the extension of the files it
244# parses. With this tag you can assign which parser to use for a given
245# extension. Doxygen has a built-in mapping, but you can override or extend it
246# using this tag. The format is ext=language, where ext is a file extension,
247# and language is one of the parsers supported by doxygen: IDL, Java,
248# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C,
249# C++. For instance to make doxygen treat .inc files as Fortran files (default
250# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note
251# that for custom extensions you also need to set FILE_PATTERNS otherwise the
252# files are not read by doxygen.
253
254EXTENSION_MAPPING =
255
256# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
257# comments according to the Markdown format, which allows for more readable
258# documentation. See http://daringfireball.net/projects/markdown/ for details.
259# The output of markdown processing is further processed by doxygen, so you
260# can mix doxygen, HTML, and XML commands with Markdown formatting.
261# Disable only in case of backward compatibilities issues.
262
263MARKDOWN_SUPPORT = YES
264
265# When enabled doxygen tries to link words that correspond to documented
266# classes, or namespaces to their corresponding documentation. Such a link can
267# be prevented in individual cases by by putting a % sign in front of the word
268# or globally by setting AUTOLINK_SUPPORT to NO.
269
270AUTOLINK_SUPPORT = YES
271
272# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
273# to include (a tag file for) the STL sources as input, then you should
274# set this tag to YES in order to let doxygen match functions declarations and
275# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
276# func(std::string) {}). This also makes the inheritance and collaboration
277# diagrams that involve STL classes more complete and accurate.
278
279BUILTIN_STL_SUPPORT = YES
280
281# If you use Microsoft's C++/CLI language, you should set this option to YES to
282# enable parsing support.
283
284CPP_CLI_SUPPORT = NO
285
286# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
287# Doxygen will parse them like normal C++ but will assume all classes use public
288# instead of private inheritance when no explicit protection keyword is present.
289
290SIP_SUPPORT = NO
291
292# For Microsoft's IDL there are propget and propput attributes to indicate
293# getter and setter methods for a property. Setting this option to YES (the
294# default) will make doxygen replace the get and set methods by a property in
295# the documentation. This will only work if the methods are indeed getting or
296# setting a simple type. If this is not the case, or you want to show the
297# methods anyway, you should set this option to NO.
298
299IDL_PROPERTY_SUPPORT = YES
300
301# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
302# tag is set to YES, then doxygen will reuse the documentation of the first
303# member in the group (if any) for the other members of the group. By default
304# all members of a group must be documented explicitly.
305
306DISTRIBUTE_GROUP_DOC = NO
307
308# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
309# the same type (for instance a group of public functions) to be put as a
310# subgroup of that type (e.g. under the Public Functions section). Set it to
311# NO to prevent subgrouping. Alternatively, this can be done per class using
312# the \nosubgrouping command.
313
314SUBGROUPING = YES
315
316# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
317# unions are shown inside the group in which they are included (e.g. using
318# @ingroup) instead of on a separate page (for HTML and Man pages) or
319# section (for LaTeX and RTF).
320
321INLINE_GROUPED_CLASSES = NO
322
323# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
324# unions with only public data fields or simple typedef fields will be shown
325# inline in the documentation of the scope in which they are defined (i.e. file,
326# namespace, or group documentation), provided this scope is documented. If set
327# to NO (the default), structs, classes, and unions are shown on a separate
328# page (for HTML and Man pages) or section (for LaTeX and RTF).
329
330INLINE_SIMPLE_STRUCTS = NO
331
332# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
333# is documented as struct, union, or enum with the name of the typedef. So
334# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
335# with name TypeT. When disabled the typedef will appear as a member of a file,
336# namespace, or class. And the struct will be named TypeS. This can typically
337# be useful for C code in case the coding convention dictates that all compound
338# types are typedef'ed and only the typedef is referenced, never the tag name.
339
340TYPEDEF_HIDES_STRUCT = NO
341
342# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
343# cache is used to resolve symbols given their name and scope. Since this can
344# be an expensive process and often the same symbol appear multiple times in
345# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too
346# small doxygen will become slower. If the cache is too large, memory is wasted.
347# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid
348# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536
349# symbols.
350
351LOOKUP_CACHE_SIZE = 0
352
353#---------------------------------------------------------------------------
354# Build related configuration options
355#---------------------------------------------------------------------------
356
357# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
358# documentation are documented, even if no documentation was available.
359# Private class members and static file members will be hidden unless
360# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES
361
362EXTRACT_ALL = NO
363
364# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
365# will be included in the documentation.
366
367EXTRACT_PRIVATE = NO
368
369# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
370# scope will be included in the documentation.
371
372EXTRACT_PACKAGE = NO
373
374# If the EXTRACT_STATIC tag is set to YES all static members of a file
375# will be included in the documentation.
376
377EXTRACT_STATIC = YES
378
379# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
380# defined locally in source files will be included in the documentation.
381# If set to NO only classes defined in header files are included.
382
383EXTRACT_LOCAL_CLASSES = NO
384
385# This flag is only useful for Objective-C code. When set to YES local
386# methods, which are defined in the implementation section but not in
387# the interface are included in the documentation.
388# If set to NO (the default) only methods in the interface are included.
389
390EXTRACT_LOCAL_METHODS = NO
391
392# If this flag is set to YES, the members of anonymous namespaces will be
393# extracted and appear in the documentation as a namespace called
394# 'anonymous_namespace{file}', where file will be replaced with the base
395# name of the file that contains the anonymous namespace. By default
396# anonymous namespaces are hidden.
397
398EXTRACT_ANON_NSPACES = NO
399
400# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
401# undocumented members of documented classes, files or namespaces.
402# If set to NO (the default) these members will be included in the
403# various overviews, but no documentation section is generated.
404# This option has no effect if EXTRACT_ALL is enabled.
405
406HIDE_UNDOC_MEMBERS = NO
407
408# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
409# undocumented classes that are normally visible in the class hierarchy.
410# If set to NO (the default) these classes will be included in the various
411# overviews. This option has no effect if EXTRACT_ALL is enabled.
412
413HIDE_UNDOC_CLASSES = NO
414
415# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
416# friend (class|struct|union) declarations.
417# If set to NO (the default) these declarations will be included in the
418# documentation.
419
420HIDE_FRIEND_COMPOUNDS = YES
421
422# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
423# documentation blocks found inside the body of a function.
424# If set to NO (the default) these blocks will be appended to the
425# function's detailed documentation block.
426
427HIDE_IN_BODY_DOCS = NO
428
429# The INTERNAL_DOCS tag determines if documentation
430# that is typed after a \internal command is included. If the tag is set
431# to NO (the default) then the documentation will be excluded.
432# Set it to YES to include the internal documentation.
433
434INTERNAL_DOCS = NO
435
436# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
437# file names in lower-case letters. If set to YES upper-case letters are also
438# allowed. This is useful if you have classes or files whose names only differ
439# in case and if your file system supports case sensitive file names. Windows
440# and Mac users are advised to set this option to NO.
441
442CASE_SENSE_NAMES = NO
443
444# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
445# will show members with their full class and namespace scopes in the
446# documentation. If set to YES the scope will be hidden.
447
448HIDE_SCOPE_NAMES = NO
449
450# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
451# will put a list of the files that are included by a file in the documentation
452# of that file.
453
454SHOW_INCLUDE_FILES = YES
455
456# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
457# will list include files with double quotes in the documentation
458# rather than with sharp brackets.
459
460FORCE_LOCAL_INCLUDES = NO
461
462# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
463# is inserted in the documentation for inline members.
464
465INLINE_INFO = YES
466
467# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
468# will sort the (detailed) documentation of file and class members
469# alphabetically by member name. If set to NO the members will appear in
470# declaration order.
471
472SORT_MEMBER_DOCS = NO
473
474# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
475# brief documentation of file, namespace and class members alphabetically
476# by member name. If set to NO (the default) the members will appear in
477# declaration order.
478
479SORT_BRIEF_DOCS = NO
480
481# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
482# will sort the (brief and detailed) documentation of class members so that
483# constructors and destructors are listed first. If set to NO (the default)
484# the constructors will appear in the respective orders defined by
485# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
486# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
487# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
488
489SORT_MEMBERS_CTORS_1ST = NO
490
491# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
492# hierarchy of group names into alphabetical order. If set to NO (the default)
493# the group names will appear in their defined order.
494
495SORT_GROUP_NAMES = NO
496
497# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
498# sorted by fully-qualified names, including namespaces. If set to
499# NO (the default), the class list will be sorted only by class name,
500# not including the namespace part.
501# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
502# Note: This option applies only to the class list, not to the
503# alphabetical list.
504
505SORT_BY_SCOPE_NAME = NO
506
507# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
508# do proper type resolution of all parameters of a function it will reject a
509# match between the prototype and the implementation of a member function even
510# if there is only one candidate or it is obvious which candidate to choose
511# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
512# will still accept a match between prototype and implementation in such cases.
513
514STRICT_PROTO_MATCHING = NO
515
516# The GENERATE_TODOLIST tag can be used to enable (YES) or
517# disable (NO) the todo list. This list is created by putting \todo
518# commands in the documentation.
519
520GENERATE_TODOLIST = YES
521
522# The GENERATE_TESTLIST tag can be used to enable (YES) or
523# disable (NO) the test list. This list is created by putting \test
524# commands in the documentation.
525
526GENERATE_TESTLIST = YES
527
528# The GENERATE_BUGLIST tag can be used to enable (YES) or
529# disable (NO) the bug list. This list is created by putting \bug
530# commands in the documentation.
531
532GENERATE_BUGLIST = YES
533
534# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
535# disable (NO) the deprecated list. This list is created by putting
536# \deprecated commands in the documentation.
537
538GENERATE_DEPRECATEDLIST= YES
539
540# The ENABLED_SECTIONS tag can be used to enable conditional
541# documentation sections, marked by \if section-label ... \endif
542# and \cond section-label ... \endcond blocks.
543
544ENABLED_SECTIONS =
545
546# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
547# the initial value of a variable or macro consists of for it to appear in
548# the documentation. If the initializer consists of more lines than specified
549# here it will be hidden. Use a value of 0 to hide initializers completely.
550# The appearance of the initializer of individual variables and macros in the
551# documentation can be controlled using \showinitializer or \hideinitializer
552# command in the documentation regardless of this setting.
553
554MAX_INITIALIZER_LINES = 30
555
556# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
557# at the bottom of the documentation of classes and structs. If set to YES the
558# list will mention the files that were used to generate the documentation.
559
560SHOW_USED_FILES = NO
561
562# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
563# This will remove the Files entry from the Quick Index and from the
564# Folder Tree View (if specified). The default is YES.
565
566SHOW_FILES = YES
567
568# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
569# Namespaces page. This will remove the Namespaces entry from the Quick Index
570# and from the Folder Tree View (if specified). The default is YES.
571
572SHOW_NAMESPACES = YES
573
574# The FILE_VERSION_FILTER tag can be used to specify a program or script that
575# doxygen should invoke to get the current version for each file (typically from
576# the version control system). Doxygen will invoke the program by executing (via
577# popen()) the command <command> <input-file>, where <command> is the value of
578# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
579# provided by doxygen. Whatever the program writes to standard output
580# is used as the file version. See the manual for examples.
581
582FILE_VERSION_FILTER =
583
584# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
585# by doxygen. The layout file controls the global structure of the generated
586# output files in an output format independent way. To create the layout file
587# that represents doxygen's defaults, run doxygen with the -l option.
588# You can optionally specify a file name after the option, if omitted
589# DoxygenLayout.xml will be used as the name of the layout file.
590
591LAYOUT_FILE =
592
593# The CITE_BIB_FILES tag can be used to specify one or more bib files
594# containing the references data. This must be a list of .bib files. The
595# .bib extension is automatically appended if omitted. Using this command
596# requires the bibtex tool to be installed. See also
597# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
598# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
599# feature you need bibtex and perl available in the search path. Do not use
600# file names with spaces, bibtex cannot handle them.
601
602CITE_BIB_FILES =
603
604#---------------------------------------------------------------------------
605# configuration options related to warning and progress messages
606#---------------------------------------------------------------------------
607
608# The QUIET tag can be used to turn on/off the messages that are generated
609# by doxygen. Possible values are YES and NO. If left blank NO is used.
610
611QUIET = NO
612
613# The WARNINGS tag can be used to turn on/off the warning messages that are
614# generated by doxygen. Possible values are YES and NO. If left blank
615# NO is used.
616
617WARNINGS = YES
618
619# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
620# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
621# automatically be disabled.
622
623WARN_IF_UNDOCUMENTED = YES
624
625# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
626# potential errors in the documentation, such as not documenting some
627# parameters in a documented function, or documenting parameters that
628# don't exist or using markup commands wrongly.
629
630WARN_IF_DOC_ERROR = YES
631
632# The WARN_NO_PARAMDOC option can be enabled to get warnings for
633# functions that are documented, but have no documentation for their parameters
634# or return value. If set to NO (the default) doxygen will only warn about
635# wrong or incomplete parameter documentation, but not about the absence of
636# documentation.
637
638WARN_NO_PARAMDOC = NO
639
640# The WARN_FORMAT tag determines the format of the warning messages that
641# doxygen can produce. The string should contain the $file, $line, and $text
642# tags, which will be replaced by the file and line number from which the
643# warning originated and the warning text. Optionally the format may contain
644# $version, which will be replaced by the version of the file (if it could
645# be obtained via FILE_VERSION_FILTER)
646
647WARN_FORMAT = "$file:$line: $text"
648
649# The WARN_LOGFILE tag can be used to specify a file to which warning
650# and error messages should be written. If left blank the output is written
651# to stderr.
652
653WARN_LOGFILE =
654
655#---------------------------------------------------------------------------
656# configuration options related to the input files
657#---------------------------------------------------------------------------
658
659# The INPUT tag can be used to specify the files and/or directories that contain
660# documented source files. You may enter file names like "myfile.cpp" or
661# directories like "/usr/src/myproject". Separate the files or directories
662# with spaces.
663
664INPUT = $(FLAIR_ROOT)/flair-src/lib/FlairFilter/src \
665 $(FLAIR_ROOT)/flair-src/lib/FlairSensorActuator/src \
666 $(FLAIR_ROOT)/flair-src/lib/FlairCore/src \
667 $(FLAIR_ROOT)/flair-src/lib/FlairSimulator/src \
668 $(FLAIR_ROOT)/flair-src/lib/FlairMeta/src
669
670# This tag can be used to specify the character encoding of the source files
671# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
672# also the default input encoding. Doxygen uses libiconv (or the iconv built
673# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
674# the list of possible encodings.
675
676INPUT_ENCODING = UTF-8
677
678# If the value of the INPUT tag contains directories, you can use the
679# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
680# and *.h) to filter out the source-files in the directories. If left
681# blank the following patterns are tested:
682# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
683# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
684# *.f90 *.f *.for *.vhd *.vhdl
685
686FILE_PATTERNS = *.h \
687 *.dox
688
689# The RECURSIVE tag can be used to turn specify whether or not subdirectories
690# should be searched for input files as well. Possible values are YES and NO.
691# If left blank NO is used.
692
693RECURSIVE = NO
694
695# The EXCLUDE tag can be used to specify files and/or directories that should be
696# excluded from the INPUT source files. This way you can easily exclude a
697# subdirectory from a directory tree whose root is specified with the INPUT tag.
698# Note that relative paths are relative to the directory from which doxygen is
699# run.
700
701EXCLUDE =
702
703# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
704# directories that are symbolic links (a Unix file system feature) are excluded
705# from the input.
706
707EXCLUDE_SYMLINKS = NO
708
709# If the value of the INPUT tag contains directories, you can use the
710# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
711# certain files from those directories. Note that the wildcards are matched
712# against the file with absolute path, so to exclude all test directories
713# for example use the pattern */test/*
714
715EXCLUDE_PATTERNS =
716
717# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
718# (namespaces, classes, functions, etc.) that should be excluded from the
719# output. The symbol name can be a fully qualified name, a word, or if the
720# wildcard * is used, a substring. Examples: ANamespace, AClass,
721# AClass::ANamespace, ANamespace::*Test
722
723EXCLUDE_SYMBOLS =
724
725# The EXAMPLE_PATH tag can be used to specify one or more files or
726# directories that contain example code fragments that are included (see
727# the \include command).
728
729EXAMPLE_PATH =
730
731# If the value of the EXAMPLE_PATH tag contains directories, you can use the
732# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
733# and *.h) to filter out the source-files in the directories. If left
734# blank all files are included.
735
736EXAMPLE_PATTERNS = *
737
738# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
739# searched for input files to be used with the \include or \dontinclude
740# commands irrespective of the value of the RECURSIVE tag.
741# Possible values are YES and NO. If left blank NO is used.
742
743EXAMPLE_RECURSIVE = NO
744
745# The IMAGE_PATH tag can be used to specify one or more files or
746# directories that contain image that are included in the documentation (see
747# the \image command).
748
749IMAGE_PATH =
750
751# The INPUT_FILTER tag can be used to specify a program that doxygen should
752# invoke to filter for each input file. Doxygen will invoke the filter program
753# by executing (via popen()) the command <filter> <input-file>, where <filter>
754# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
755# input file. Doxygen will then use the output that the filter program writes
756# to standard output. If FILTER_PATTERNS is specified, this tag will be ignored.
757# Note that the filter must not add or remove lines; it is applied before the
758# code is scanned, but not when the output code is generated. If lines are added
759# or removed, the anchors will not be placed correctly.
760
761INPUT_FILTER =
762
763# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
764# basis. Doxygen will compare the file name with each pattern and apply the
765# filter if there is a match. The filters are a list of the form:
766# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
767# info on how filters are used. If FILTER_PATTERNS is empty or if
768# non of the patterns match the file name, INPUT_FILTER is applied.
769
770FILTER_PATTERNS =
771
772# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
773# INPUT_FILTER) will be used to filter the input files when producing source
774# files to browse (i.e. when SOURCE_BROWSER is set to YES).
775
776FILTER_SOURCE_FILES = NO
777
778# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
779# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
780# and it is also possible to disable source filtering for a specific pattern
781# using *.ext= (so without naming a filter). This option only has effect when
782# FILTER_SOURCE_FILES is enabled.
783
784FILTER_SOURCE_PATTERNS =
785
786# If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that
787# is part of the input, its contents will be placed on the main page
788# (index.html). This can be useful if you have a project on for instance GitHub
789# and want reuse the introduction page also for the doxygen output.
790
791USE_MDFILE_AS_MAINPAGE =
792
793#---------------------------------------------------------------------------
794# configuration options related to source browsing
795#---------------------------------------------------------------------------
796
797# If the SOURCE_BROWSER tag is set to YES then a list of source files will
798# be generated. Documented entities will be cross-referenced with these sources.
799# Note: To get rid of all source code in the generated output, make sure also
800# VERBATIM_HEADERS is set to NO.
801
802SOURCE_BROWSER = NO
803
804# Setting the INLINE_SOURCES tag to YES will include the body
805# of functions and classes directly in the documentation.
806
807INLINE_SOURCES = NO
808
809# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
810# doxygen to hide any special comment blocks from generated source code
811# fragments. Normal C, C++ and Fortran comments will always remain visible.
812
813STRIP_CODE_COMMENTS = YES
814
815# If the REFERENCED_BY_RELATION tag is set to YES
816# then for each documented function all documented
817# functions referencing it will be listed.
818
819REFERENCED_BY_RELATION = NO
820
821# If the REFERENCES_RELATION tag is set to YES
822# then for each documented function all documented entities
823# called/used by that function will be listed.
824
825REFERENCES_RELATION = NO
826
827# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
828# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
829# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
830# link to the source code. Otherwise they will link to the documentation.
831
832REFERENCES_LINK_SOURCE = YES
833
834# If the USE_HTAGS tag is set to YES then the references to source code
835# will point to the HTML generated by the htags(1) tool instead of doxygen
836# built-in source browser. The htags tool is part of GNU's global source
837# tagging system (see http://www.gnu.org/software/global/global.html). You
838# will need version 4.8.6 or higher.
839
840USE_HTAGS = NO
841
842# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
843# will generate a verbatim copy of the header file for each class for
844# which an include is specified. Set to NO to disable this.
845
846VERBATIM_HEADERS = YES
847
848#---------------------------------------------------------------------------
849# configuration options related to the alphabetical class index
850#---------------------------------------------------------------------------
851
852# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
853# of all compounds will be generated. Enable this if the project
854# contains a lot of classes, structs, unions or interfaces.
855
856ALPHABETICAL_INDEX = YES
857
858# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
859# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
860# in which this list will be split (can be a number in the range [1..20])
861
862COLS_IN_ALPHA_INDEX = 5
863
864# In case all classes in a project start with a common prefix, all
865# classes will be put under the same header in the alphabetical index.
866# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
867# should be ignored while generating the index headers.
868
869IGNORE_PREFIX =
870
871#---------------------------------------------------------------------------
872# configuration options related to the HTML output
873#---------------------------------------------------------------------------
874
875# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
876# generate HTML output.
877
878GENERATE_HTML = YES
879
880# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
881# If a relative path is entered the value of OUTPUT_DIRECTORY will be
882# put in front of it. If left blank `html' will be used as the default path.
883
884HTML_OUTPUT = Flair
885
886# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
887# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
888# doxygen will generate files with .html extension.
889
890HTML_FILE_EXTENSION = .html
891
892# The HTML_HEADER tag can be used to specify a personal HTML header for
893# each generated HTML page. If it is left blank doxygen will generate a
894# standard header. Note that when using a custom header you are responsible
895# for the proper inclusion of any scripts and style sheets that doxygen
896# needs, which is dependent on the configuration options used.
897# It is advised to generate a default header using "doxygen -w html
898# header.html footer.html stylesheet.css YourConfigFile" and then modify
899# that header. Note that the header is subject to change so you typically
900# have to redo this when upgrading to a newer version of doxygen or when
901# changing the value of configuration settings such as GENERATE_TREEVIEW!
902
903HTML_HEADER =
904
905# The HTML_FOOTER tag can be used to specify a personal HTML footer for
906# each generated HTML page. If it is left blank doxygen will generate a
907# standard footer.
908
909HTML_FOOTER =
910
911# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
912# style sheet that is used by each HTML page. It can be used to
913# fine-tune the look of the HTML output. If left blank doxygen will
914# generate a default style sheet. Note that it is recommended to use
915# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this
916# tag will in the future become obsolete.
917
918HTML_STYLESHEET =
919
920# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional
921# user-defined cascading style sheet that is included after the standard
922# style sheets created by doxygen. Using this option one can overrule
923# certain style aspects. This is preferred over using HTML_STYLESHEET
924# since it does not replace the standard style sheet and is therefor more
925# robust against future updates. Doxygen will copy the style sheet file to
926# the output directory.
927
928HTML_EXTRA_STYLESHEET =
929
930# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
931# other source files which should be copied to the HTML output directory. Note
932# that these files will be copied to the base HTML output directory. Use the
933# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
934# files. In the HTML_STYLESHEET file, use the file name only. Also note that
935# the files will be copied as-is; there are no commands or markers available.
936
937HTML_EXTRA_FILES =
938
939# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
940# Doxygen will adjust the colors in the style sheet and background images
941# according to this color. Hue is specified as an angle on a colorwheel,
942# see http://en.wikipedia.org/wiki/Hue for more information.
943# For instance the value 0 represents red, 60 is yellow, 120 is green,
944# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
945# The allowed range is 0 to 359.
946
947HTML_COLORSTYLE_HUE = 220
948
949# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
950# the colors in the HTML output. For a value of 0 the output will use
951# grayscales only. A value of 255 will produce the most vivid colors.
952
953HTML_COLORSTYLE_SAT = 100
954
955# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
956# the luminance component of the colors in the HTML output. Values below
957# 100 gradually make the output lighter, whereas values above 100 make
958# the output darker. The value divided by 100 is the actual gamma applied,
959# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
960# and 100 does not change the gamma.
961
962HTML_COLORSTYLE_GAMMA = 80
963
964# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
965# page will contain the date and time when the page was generated. Setting
966# this to NO can help when comparing the output of multiple runs.
967
968HTML_TIMESTAMP = YES
969
970# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
971# documentation will contain sections that can be hidden and shown after the
972# page has loaded.
973
974HTML_DYNAMIC_SECTIONS = YES
975
976# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
977# entries shown in the various tree structured indices initially; the user
978# can expand and collapse entries dynamically later on. Doxygen will expand
979# the tree to such a level that at most the specified number of entries are
980# visible (unless a fully collapsed tree already exceeds this amount).
981# So setting the number of entries 1 will produce a full collapsed tree by
982# default. 0 is a special value representing an infinite number of entries
983# and will result in a full expanded tree by default.
984
985HTML_INDEX_NUM_ENTRIES = 100
986
987# If the GENERATE_DOCSET tag is set to YES, additional index files
988# will be generated that can be used as input for Apple's Xcode 3
989# integrated development environment, introduced with OSX 10.5 (Leopard).
990# To create a documentation set, doxygen will generate a Makefile in the
991# HTML output directory. Running make will produce the docset in that
992# directory and running "make install" will install the docset in
993# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
994# it at startup.
995# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
996# for more information.
997
998GENERATE_DOCSET = NO
999
1000# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
1001# feed. A documentation feed provides an umbrella under which multiple
1002# documentation sets from a single provider (such as a company or product suite)
1003# can be grouped.
1004
1005DOCSET_FEEDNAME = "Doxygen generated docs"
1006
1007# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
1008# should uniquely identify the documentation set bundle. This should be a
1009# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
1010# will append .docset to the name.
1011
1012DOCSET_BUNDLE_ID = org.doxygen.Project
1013
1014# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely
1015# identify the documentation publisher. This should be a reverse domain-name
1016# style string, e.g. com.mycompany.MyDocSet.documentation.
1017
1018DOCSET_PUBLISHER_ID = org.doxygen.Publisher
1019
1020# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
1021
1022DOCSET_PUBLISHER_NAME = Publisher
1023
1024# If the GENERATE_HTMLHELP tag is set to YES, additional index files
1025# will be generated that can be used as input for tools like the
1026# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
1027# of the generated HTML documentation.
1028
1029GENERATE_HTMLHELP = NO
1030
1031# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
1032# be used to specify the file name of the resulting .chm file. You
1033# can add a path in front of the file if the result should not be
1034# written to the html output directory.
1035
1036CHM_FILE =
1037
1038# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
1039# be used to specify the location (absolute path including file name) of
1040# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
1041# the HTML help compiler on the generated index.hhp.
1042
1043HHC_LOCATION =
1044
1045# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
1046# controls if a separate .chi index file is generated (YES) or that
1047# it should be included in the master .chm file (NO).
1048
1049GENERATE_CHI = NO
1050
1051# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
1052# is used to encode HtmlHelp index (hhk), content (hhc) and project file
1053# content.
1054
1055CHM_INDEX_ENCODING =
1056
1057# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
1058# controls whether a binary table of contents is generated (YES) or a
1059# normal table of contents (NO) in the .chm file.
1060
1061BINARY_TOC = NO
1062
1063# The TOC_EXPAND flag can be set to YES to add extra items for group members
1064# to the contents of the HTML help documentation and to the tree view.
1065
1066TOC_EXPAND = NO
1067
1068# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1069# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
1070# that can be used as input for Qt's qhelpgenerator to generate a
1071# Qt Compressed Help (.qch) of the generated HTML documentation.
1072
1073GENERATE_QHP = NO
1074
1075# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
1076# be used to specify the file name of the resulting .qch file.
1077# The path specified is relative to the HTML output folder.
1078
1079QCH_FILE =
1080
1081# The QHP_NAMESPACE tag specifies the namespace to use when generating
1082# Qt Help Project output. For more information please see
1083# http://doc.trolltech.com/qthelpproject.html#namespace
1084
1085QHP_NAMESPACE = org.doxygen.Project
1086
1087# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
1088# Qt Help Project output. For more information please see
1089# http://doc.trolltech.com/qthelpproject.html#virtual-folders
1090
1091QHP_VIRTUAL_FOLDER = doc
1092
1093# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
1094# add. For more information please see
1095# http://doc.trolltech.com/qthelpproject.html#custom-filters
1096
1097QHP_CUST_FILTER_NAME =
1098
1099# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
1100# custom filter to add. For more information please see
1101# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
1102# Qt Help Project / Custom Filters</a>.
1103
1104QHP_CUST_FILTER_ATTRS =
1105
1106# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1107# project's
1108# filter section matches.
1109# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
1110# Qt Help Project / Filter Attributes</a>.
1111
1112QHP_SECT_FILTER_ATTRS =
1113
1114# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
1115# be used to specify the location of Qt's qhelpgenerator.
1116# If non-empty doxygen will try to run qhelpgenerator on the generated
1117# .qhp file.
1118
1119QHG_LOCATION =
1120
1121# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
1122# will be generated, which together with the HTML files, form an Eclipse help
1123# plugin. To install this plugin and make it available under the help contents
1124# menu in Eclipse, the contents of the directory containing the HTML and XML
1125# files needs to be copied into the plugins directory of eclipse. The name of
1126# the directory within the plugins directory should be the same as
1127# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
1128# the help appears.
1129
1130GENERATE_ECLIPSEHELP = NO
1131
1132# A unique identifier for the eclipse help plugin. When installing the plugin
1133# the directory name containing the HTML and XML files should also have
1134# this name.
1135
1136ECLIPSE_DOC_ID = org.doxygen.Project
1137
1138# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
1139# at top of each HTML page. The value NO (the default) enables the index and
1140# the value YES disables it. Since the tabs have the same information as the
1141# navigation tree you can set this option to NO if you already set
1142# GENERATE_TREEVIEW to YES.
1143
1144DISABLE_INDEX = NO
1145
1146# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1147# structure should be generated to display hierarchical information.
1148# If the tag value is set to YES, a side panel will be generated
1149# containing a tree-like index structure (just like the one that
1150# is generated for HTML Help). For this to work a browser that supports
1151# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
1152# Windows users are probably better off using the HTML help feature.
1153# Since the tree basically has the same information as the tab index you
1154# could consider to set DISABLE_INDEX to NO when enabling this option.
1155
1156GENERATE_TREEVIEW = YES
1157
1158# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
1159# (range [0,1..20]) that doxygen will group on one line in the generated HTML
1160# documentation. Note that a value of 0 will completely suppress the enum
1161# values from appearing in the overview section.
1162
1163ENUM_VALUES_PER_LINE = 4
1164
1165# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
1166# used to set the initial width (in pixels) of the frame in which the tree
1167# is shown.
1168
1169TREEVIEW_WIDTH = 250
1170
1171# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
1172# links to external symbols imported via tag files in a separate window.
1173
1174EXT_LINKS_IN_WINDOW = YES
1175
1176# Use this tag to change the font size of Latex formulas included
1177# as images in the HTML documentation. The default is 10. Note that
1178# when you change the font size after a successful doxygen run you need
1179# to manually remove any form_*.png images from the HTML output directory
1180# to force them to be regenerated.
1181
1182FORMULA_FONTSIZE = 10
1183
1184# Use the FORMULA_TRANPARENT tag to determine whether or not the images
1185# generated for formulas are transparent PNGs. Transparent PNGs are
1186# not supported properly for IE 6.0, but are supported on all modern browsers.
1187# Note that when changing this option you need to delete any form_*.png files
1188# in the HTML output before the changes have effect.
1189
1190FORMULA_TRANSPARENT = YES
1191
1192# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
1193# (see http://www.mathjax.org) which uses client side Javascript for the
1194# rendering instead of using prerendered bitmaps. Use this if you do not
1195# have LaTeX installed or if you want to formulas look prettier in the HTML
1196# output. When enabled you may also need to install MathJax separately and
1197# configure the path to it using the MATHJAX_RELPATH option.
1198
1199USE_MATHJAX = NO
1200
1201# When MathJax is enabled you can set the default output format to be used for
1202# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and
1203# SVG. The default value is HTML-CSS, which is slower, but has the best
1204# compatibility.
1205
1206MATHJAX_FORMAT = HTML-CSS
1207
1208# When MathJax is enabled you need to specify the location relative to the
1209# HTML output directory using the MATHJAX_RELPATH option. The destination
1210# directory should contain the MathJax.js script. For instance, if the mathjax
1211# directory is located at the same level as the HTML output directory, then
1212# MATHJAX_RELPATH should be ../mathjax. The default value points to
1213# the MathJax Content Delivery Network so you can quickly see the result without
1214# installing MathJax. However, it is strongly recommended to install a local
1215# copy of MathJax from http://www.mathjax.org before deployment.
1216
1217MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
1218
1219# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
1220# names that should be enabled during MathJax rendering.
1221
1222MATHJAX_EXTENSIONS =
1223
1224# The MATHJAX_CODEFILE tag can be used to specify a file with javascript
1225# pieces of code that will be used on startup of the MathJax code.
1226
1227MATHJAX_CODEFILE =
1228
1229# When the SEARCHENGINE tag is enabled doxygen will generate a search box
1230# for the HTML output. The underlying search engine uses javascript
1231# and DHTML and should work on any modern browser. Note that when using
1232# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
1233# (GENERATE_DOCSET) there is already a search function so this one should
1234# typically be disabled. For large projects the javascript based search engine
1235# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
1236
1237SEARCHENGINE = YES
1238
1239# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1240# implemented using a web server instead of a web client using Javascript.
1241# There are two flavours of web server based search depending on the
1242# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for
1243# searching and an index file used by the script. When EXTERNAL_SEARCH is
1244# enabled the indexing and searching needs to be provided by external tools.
1245# See the manual for details.
1246
1247SERVER_BASED_SEARCH = NO
1248
1249# When EXTERNAL_SEARCH is enabled doxygen will no longer generate the PHP
1250# script for searching. Instead the search results are written to an XML file
1251# which needs to be processed by an external indexer. Doxygen will invoke an
1252# external search engine pointed to by the SEARCHENGINE_URL option to obtain
1253# the search results. Doxygen ships with an example indexer (doxyindexer) and
1254# search engine (doxysearch.cgi) which are based on the open source search
1255# engine library Xapian. See the manual for configuration details.
1256
1257EXTERNAL_SEARCH = NO
1258
1259# The SEARCHENGINE_URL should point to a search engine hosted by a web server
1260# which will returned the search results when EXTERNAL_SEARCH is enabled.
1261# Doxygen ships with an example search engine (doxysearch) which is based on
1262# the open source search engine library Xapian. See the manual for configuration
1263# details.
1264
1265SEARCHENGINE_URL =
1266
1267# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
1268# search data is written to a file for indexing by an external tool. With the
1269# SEARCHDATA_FILE tag the name of this file can be specified.
1270
1271SEARCHDATA_FILE = searchdata.xml
1272
1273# When SERVER_BASED_SEARCH AND EXTERNAL_SEARCH are both enabled the
1274# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
1275# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
1276# projects and redirect the results back to the right project.
1277
1278EXTERNAL_SEARCH_ID =
1279
1280# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
1281# projects other than the one defined by this configuration file, but that are
1282# all added to the same external search index. Each project needs to have a
1283# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id
1284# of to a relative location where the documentation can be found.
1285# The format is: EXTRA_SEARCH_MAPPINGS = id1=loc1 id2=loc2 ...
1286
1287EXTRA_SEARCH_MAPPINGS =
1288
1289#---------------------------------------------------------------------------
1290# configuration options related to the LaTeX output
1291#---------------------------------------------------------------------------
1292
1293# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
1294# generate Latex output.
1295
1296GENERATE_LATEX = NO
1297
1298# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1299# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1300# put in front of it. If left blank `latex' will be used as the default path.
1301
1302LATEX_OUTPUT = latex
1303
1304# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1305# invoked. If left blank `latex' will be used as the default command name.
1306# Note that when enabling USE_PDFLATEX this option is only used for
1307# generating bitmaps for formulas in the HTML output, but not in the
1308# Makefile that is written to the output directory.
1309
1310LATEX_CMD_NAME = latex
1311
1312# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1313# generate index for LaTeX. If left blank `makeindex' will be used as the
1314# default command name.
1315
1316MAKEINDEX_CMD_NAME = makeindex
1317
1318# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1319# LaTeX documents. This may be useful for small projects and may help to
1320# save some trees in general.
1321
1322COMPACT_LATEX = NO
1323
1324# The PAPER_TYPE tag can be used to set the paper type that is used
1325# by the printer. Possible values are: a4, letter, legal and
1326# executive. If left blank a4 will be used.
1327
1328PAPER_TYPE = a4
1329
1330# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1331# packages that should be included in the LaTeX output.
1332
1333EXTRA_PACKAGES =
1334
1335# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1336# the generated latex document. The header should contain everything until
1337# the first chapter. If it is left blank doxygen will generate a
1338# standard header. Notice: only use this tag if you know what you are doing!
1339
1340LATEX_HEADER =
1341
1342# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
1343# the generated latex document. The footer should contain everything after
1344# the last chapter. If it is left blank doxygen will generate a
1345# standard footer. Notice: only use this tag if you know what you are doing!
1346
1347LATEX_FOOTER =
1348
1349# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images
1350# or other source files which should be copied to the LaTeX output directory.
1351# Note that the files will be copied as-is; there are no commands or markers
1352# available.
1353
1354LATEX_EXTRA_FILES =
1355
1356# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1357# is prepared for conversion to pdf (using ps2pdf). The pdf file will
1358# contain links (just like the HTML output) instead of page references
1359# This makes the output suitable for online browsing using a pdf viewer.
1360
1361PDF_HYPERLINKS = YES
1362
1363# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1364# plain latex in the generated Makefile. Set this option to YES to get a
1365# higher quality PDF documentation.
1366
1367USE_PDFLATEX = YES
1368
1369# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1370# command to the generated LaTeX files. This will instruct LaTeX to keep
1371# running if errors occur, instead of asking the user for help.
1372# This option is also used when generating formulas in HTML.
1373
1374LATEX_BATCHMODE = NO
1375
1376# If LATEX_HIDE_INDICES is set to YES then doxygen will not
1377# include the index chapters (such as File Index, Compound Index, etc.)
1378# in the output.
1379
1380LATEX_HIDE_INDICES = NO
1381
1382# If LATEX_SOURCE_CODE is set to YES then doxygen will include
1383# source code with syntax highlighting in the LaTeX output.
1384# Note that which sources are shown also depends on other settings
1385# such as SOURCE_BROWSER.
1386
1387LATEX_SOURCE_CODE = NO
1388
1389# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
1390# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
1391# http://en.wikipedia.org/wiki/BibTeX for more info.
1392
1393LATEX_BIB_STYLE = plain
1394
1395#---------------------------------------------------------------------------
1396# configuration options related to the RTF output
1397#---------------------------------------------------------------------------
1398
1399# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1400# The RTF output is optimized for Word 97 and may not look very pretty with
1401# other RTF readers or editors.
1402
1403GENERATE_RTF = NO
1404
1405# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1406# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1407# put in front of it. If left blank `rtf' will be used as the default path.
1408
1409RTF_OUTPUT = rtf
1410
1411# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1412# RTF documents. This may be useful for small projects and may help to
1413# save some trees in general.
1414
1415COMPACT_RTF = NO
1416
1417# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1418# will contain hyperlink fields. The RTF file will
1419# contain links (just like the HTML output) instead of page references.
1420# This makes the output suitable for online browsing using WORD or other
1421# programs which support those fields.
1422# Note: wordpad (write) and others do not support links.
1423
1424RTF_HYPERLINKS = NO
1425
1426# Load style sheet definitions from file. Syntax is similar to doxygen's
1427# config file, i.e. a series of assignments. You only have to provide
1428# replacements, missing definitions are set to their default value.
1429
1430RTF_STYLESHEET_FILE =
1431
1432# Set optional variables used in the generation of an rtf document.
1433# Syntax is similar to doxygen's config file.
1434
1435RTF_EXTENSIONS_FILE =
1436
1437#---------------------------------------------------------------------------
1438# configuration options related to the man page output
1439#---------------------------------------------------------------------------
1440
1441# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1442# generate man pages
1443
1444GENERATE_MAN = NO
1445
1446# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1447# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1448# put in front of it. If left blank `man' will be used as the default path.
1449
1450MAN_OUTPUT = man
1451
1452# The MAN_EXTENSION tag determines the extension that is added to
1453# the generated man pages (default is the subroutine's section .3)
1454
1455MAN_EXTENSION = .3
1456
1457# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1458# then it will generate one additional man file for each entity
1459# documented in the real man page(s). These additional files
1460# only source the real man page, but without them the man command
1461# would be unable to find the correct page. The default is NO.
1462
1463MAN_LINKS = NO
1464
1465#---------------------------------------------------------------------------
1466# configuration options related to the XML output
1467#---------------------------------------------------------------------------
1468
1469# If the GENERATE_XML tag is set to YES Doxygen will
1470# generate an XML file that captures the structure of
1471# the code including all documentation.
1472
1473GENERATE_XML = NO
1474
1475# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1476# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1477# put in front of it. If left blank `xml' will be used as the default path.
1478
1479XML_OUTPUT = xml
1480
1481# The XML_SCHEMA tag can be used to specify an XML schema,
1482# which can be used by a validating XML parser to check the
1483# syntax of the XML files.
1484
1485XML_SCHEMA =
1486
1487# The XML_DTD tag can be used to specify an XML DTD,
1488# which can be used by a validating XML parser to check the
1489# syntax of the XML files.
1490
1491XML_DTD =
1492
1493# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1494# dump the program listings (including syntax highlighting
1495# and cross-referencing information) to the XML output. Note that
1496# enabling this will significantly increase the size of the XML output.
1497
1498XML_PROGRAMLISTING = YES
1499
1500#---------------------------------------------------------------------------
1501# configuration options related to the DOCBOOK output
1502#---------------------------------------------------------------------------
1503
1504# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files
1505# that can be used to generate PDF.
1506
1507GENERATE_DOCBOOK = NO
1508
1509# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put.
1510# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
1511# front of it. If left blank docbook will be used as the default path.
1512
1513DOCBOOK_OUTPUT = docbook
1514
1515#---------------------------------------------------------------------------
1516# configuration options for the AutoGen Definitions output
1517#---------------------------------------------------------------------------
1518
1519# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1520# generate an AutoGen Definitions (see autogen.sf.net) file
1521# that captures the structure of the code including all
1522# documentation. Note that this feature is still experimental
1523# and incomplete at the moment.
1524
1525GENERATE_AUTOGEN_DEF = NO
1526
1527#---------------------------------------------------------------------------
1528# configuration options related to the Perl module output
1529#---------------------------------------------------------------------------
1530
1531# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1532# generate a Perl module file that captures the structure of
1533# the code including all documentation. Note that this
1534# feature is still experimental and incomplete at the
1535# moment.
1536
1537GENERATE_PERLMOD = NO
1538
1539# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1540# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1541# to generate PDF and DVI output from the Perl module output.
1542
1543PERLMOD_LATEX = NO
1544
1545# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1546# nicely formatted so it can be parsed by a human reader. This is useful
1547# if you want to understand what is going on. On the other hand, if this
1548# tag is set to NO the size of the Perl module output will be much smaller
1549# and Perl will parse it just the same.
1550
1551PERLMOD_PRETTY = YES
1552
1553# The names of the make variables in the generated doxyrules.make file
1554# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1555# This is useful so different doxyrules.make files included by the same
1556# Makefile don't overwrite each other's variables.
1557
1558PERLMOD_MAKEVAR_PREFIX =
1559
1560#---------------------------------------------------------------------------
1561# Configuration options related to the preprocessor
1562#---------------------------------------------------------------------------
1563
1564# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1565# evaluate all C-preprocessor directives found in the sources and include
1566# files.
1567
1568ENABLE_PREPROCESSING = YES
1569
1570# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1571# names in the source code. If set to NO (the default) only conditional
1572# compilation will be performed. Macro expansion can be done in a controlled
1573# way by setting EXPAND_ONLY_PREDEF to YES.
1574
1575MACRO_EXPANSION = NO
1576
1577# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1578# then the macro expansion is limited to the macros specified with the
1579# PREDEFINED and EXPAND_AS_DEFINED tags.
1580
1581EXPAND_ONLY_PREDEF = NO
1582
1583# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1584# pointed to by INCLUDE_PATH will be searched when a #include is found.
1585
1586SEARCH_INCLUDES = YES
1587
1588# The INCLUDE_PATH tag can be used to specify one or more directories that
1589# contain include files that are not input files but should be processed by
1590# the preprocessor.
1591
1592INCLUDE_PATH =
1593
1594# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1595# patterns (like *.h and *.hpp) to filter out the header-files in the
1596# directories. If left blank, the patterns specified with FILE_PATTERNS will
1597# be used.
1598
1599INCLUDE_FILE_PATTERNS =
1600
1601# The PREDEFINED tag can be used to specify one or more macro names that
1602# are defined before the preprocessor is started (similar to the -D option of
1603# gcc). The argument of the tag is a list of macros of the form: name
1604# or name=definition (no spaces). If the definition and the = are
1605# omitted =1 is assumed. To prevent a macro definition from being
1606# undefined via #undef or recursively expanded use the := operator
1607# instead of the = operator.
1608
1609PREDEFINED =
1610
1611# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1612# this tag can be used to specify a list of macro names that should be expanded.
1613# The macro definition that is found in the sources will be used.
1614# Use the PREDEFINED tag if you want to use a different macro definition that
1615# overrules the definition found in the source code.
1616
1617EXPAND_AS_DEFINED =
1618
1619# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1620# doxygen's preprocessor will remove all references to function-like macros
1621# that are alone on a line, have an all uppercase name, and do not end with a
1622# semicolon, because these will confuse the parser if not removed.
1623
1624SKIP_FUNCTION_MACROS = YES
1625
1626#---------------------------------------------------------------------------
1627# Configuration::additions related to external references
1628#---------------------------------------------------------------------------
1629
1630# The TAGFILES option can be used to specify one or more tagfiles. For each
1631# tag file the location of the external documentation should be added. The
1632# format of a tag file without this location is as follows:
1633# TAGFILES = file1 file2 ...
1634# Adding location for the tag files is done as follows:
1635# TAGFILES = file1=loc1 "file2 = loc2" ...
1636# where "loc1" and "loc2" can be relative or absolute paths
1637# or URLs. Note that each tag file must have a unique name (where the name does
1638# NOT include the path). If a tag file is not located in the directory in which
1639# doxygen is run, you must also specify the path to the tagfile here.
1640
1641TAGFILES = $(FLAIR_ROOT)/flair-dev/doc/qt.tag=http://qt-project.org/doc/qt-4.8
1642
1643# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1644# a tag file that is based on the input files it reads.
1645
1646GENERATE_TAGFILE =
1647
1648# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1649# in the class index. If set to NO only the inherited external classes
1650# will be listed.
1651
1652ALLEXTERNALS = NO
1653
1654# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1655# in the modules index. If set to NO, only the current project's groups will
1656# be listed.
1657
1658EXTERNAL_GROUPS = NO
1659
1660# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed
1661# in the related pages index. If set to NO, only the current project's
1662# pages will be listed.
1663
1664EXTERNAL_PAGES = YES
1665
1666# The PERL_PATH should be the absolute path and name of the perl script
1667# interpreter (i.e. the result of `which perl').
1668
1669PERL_PATH = /usr/bin/perl
1670
1671#---------------------------------------------------------------------------
1672# Configuration options related to the dot tool
1673#---------------------------------------------------------------------------
1674
1675# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1676# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1677# or super classes. Setting the tag to NO turns the diagrams off. Note that
1678# this option also works with HAVE_DOT disabled, but it is recommended to
1679# install and use dot, since it yields more powerful graphs.
1680
1681CLASS_DIAGRAMS = YES
1682
1683# You can define message sequence charts within doxygen comments using the \msc
1684# command. Doxygen will then run the mscgen tool (see
1685# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1686# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1687# the mscgen tool resides. If left empty the tool is assumed to be found in the
1688# default search path.
1689
1690MSCGEN_PATH =
1691
1692# If set to YES, the inheritance and collaboration graphs will hide
1693# inheritance and usage relations if the target is undocumented
1694# or is not a class.
1695
1696HIDE_UNDOC_RELATIONS = YES
1697
1698# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1699# available from the path. This tool is part of Graphviz, a graph visualization
1700# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1701# have no effect if this option is set to NO (the default)
1702
1703HAVE_DOT = NO
1704
1705# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
1706# allowed to run in parallel. When set to 0 (the default) doxygen will
1707# base this on the number of processors available in the system. You can set it
1708# explicitly to a value larger than 0 to get control over the balance
1709# between CPU load and processing speed.
1710
1711DOT_NUM_THREADS = 0
1712
1713# By default doxygen will use the Helvetica font for all dot files that
1714# doxygen generates. When you want a differently looking font you can specify
1715# the font name using DOT_FONTNAME. You need to make sure dot is able to find
1716# the font, which can be done by putting it in a standard location or by setting
1717# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
1718# directory containing the font.
1719
1720DOT_FONTNAME = Helvetica
1721
1722# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1723# The default size is 10pt.
1724
1725DOT_FONTSIZE = 10
1726
1727# By default doxygen will tell dot to use the Helvetica font.
1728# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
1729# set the path where dot can find it.
1730
1731DOT_FONTPATH =
1732
1733# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1734# will generate a graph for each documented class showing the direct and
1735# indirect inheritance relations. Setting this tag to YES will force the
1736# CLASS_DIAGRAMS tag to NO.
1737
1738CLASS_GRAPH = YES
1739
1740# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1741# will generate a graph for each documented class showing the direct and
1742# indirect implementation dependencies (inheritance, containment, and
1743# class references variables) of the class with other documented classes.
1744
1745COLLABORATION_GRAPH = YES
1746
1747# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1748# will generate a graph for groups, showing the direct groups dependencies
1749
1750GROUP_GRAPHS = YES
1751
1752# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1753# collaboration diagrams in a style similar to the OMG's Unified Modeling
1754# Language.
1755
1756UML_LOOK = NO
1757
1758# If the UML_LOOK tag is enabled, the fields and methods are shown inside
1759# the class node. If there are many fields or methods and many nodes the
1760# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
1761# threshold limits the number of items for each type to make the size more
1762# manageable. Set this to 0 for no limit. Note that the threshold may be
1763# exceeded by 50% before the limit is enforced.
1764
1765UML_LIMIT_NUM_FIELDS = 10
1766
1767# If set to YES, the inheritance and collaboration graphs will show the
1768# relations between templates and their instances.
1769
1770TEMPLATE_RELATIONS = NO
1771
1772# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1773# tags are set to YES then doxygen will generate a graph for each documented
1774# file showing the direct and indirect include dependencies of the file with
1775# other documented files.
1776
1777INCLUDE_GRAPH = YES
1778
1779# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1780# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1781# documented header file showing the documented files that directly or
1782# indirectly include this file.
1783
1784INCLUDED_BY_GRAPH = YES
1785
1786# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1787# doxygen will generate a call dependency graph for every global function
1788# or class method. Note that enabling this option will significantly increase
1789# the time of a run. So in most cases it will be better to enable call graphs
1790# for selected functions only using the \callgraph command.
1791
1792CALL_GRAPH = NO
1793
1794# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1795# doxygen will generate a caller dependency graph for every global function
1796# or class method. Note that enabling this option will significantly increase
1797# the time of a run. So in most cases it will be better to enable caller
1798# graphs for selected functions only using the \callergraph command.
1799
1800CALLER_GRAPH = NO
1801
1802# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1803# will generate a graphical hierarchy of all classes instead of a textual one.
1804
1805GRAPHICAL_HIERARCHY = YES
1806
1807# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
1808# then doxygen will show the dependencies a directory has on other directories
1809# in a graphical way. The dependency relations are determined by the #include
1810# relations between the files in the directories.
1811
1812DIRECTORY_GRAPH = YES
1813
1814# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1815# generated by dot. Possible values are svg, png, jpg, or gif.
1816# If left blank png will be used. If you choose svg you need to set
1817# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
1818# visible in IE 9+ (other browsers do not have this requirement).
1819
1820DOT_IMAGE_FORMAT = png
1821
1822# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
1823# enable generation of interactive SVG images that allow zooming and panning.
1824# Note that this requires a modern browser other than Internet Explorer.
1825# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
1826# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
1827# visible. Older versions of IE do not have SVG support.
1828
1829INTERACTIVE_SVG = NO
1830
1831# The tag DOT_PATH can be used to specify the path where the dot tool can be
1832# found. If left blank, it is assumed the dot tool can be found in the path.
1833
1834DOT_PATH =
1835
1836# The DOTFILE_DIRS tag can be used to specify one or more directories that
1837# contain dot files that are included in the documentation (see the
1838# \dotfile command).
1839
1840DOTFILE_DIRS =
1841
1842# The MSCFILE_DIRS tag can be used to specify one or more directories that
1843# contain msc files that are included in the documentation (see the
1844# \mscfile command).
1845
1846MSCFILE_DIRS =
1847
1848# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1849# nodes that will be shown in the graph. If the number of nodes in a graph
1850# becomes larger than this value, doxygen will truncate the graph, which is
1851# visualized by representing a node as a red box. Note that doxygen if the
1852# number of direct children of the root node in a graph is already larger than
1853# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1854# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1855
1856DOT_GRAPH_MAX_NODES = 50
1857
1858# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1859# graphs generated by dot. A depth value of 3 means that only nodes reachable
1860# from the root by following a path via at most 3 edges will be shown. Nodes
1861# that lay further from the root node will be omitted. Note that setting this
1862# option to 1 or 2 may greatly reduce the computation time needed for large
1863# code bases. Also note that the size of a graph can be further restricted by
1864# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1865
1866MAX_DOT_GRAPH_DEPTH = 0
1867
1868# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1869# background. This is disabled by default, because dot on Windows does not
1870# seem to support this out of the box. Warning: Depending on the platform used,
1871# enabling this option may lead to badly anti-aliased labels on the edges of
1872# a graph (i.e. they become hard to read).
1873
1874DOT_TRANSPARENT = NO
1875
1876# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1877# files in one run (i.e. multiple -o and -T options on the command line). This
1878# makes dot run faster, but since only newer versions of dot (>1.8.10)
1879# support this, this feature is disabled by default.
1880
1881DOT_MULTI_TARGETS = NO
1882
1883# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1884# generate a legend page explaining the meaning of the various boxes and
1885# arrows in the dot generated graphs.
1886
1887GENERATE_LEGEND = YES
1888
1889# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1890# remove the intermediate dot files that are used to generate
1891# the various graphs.
1892
1893DOT_CLEANUP = YES
Note: See TracBrowser for help on using the repository browser.