source: flair-src/trunk/lib/FlairMeta/src/UavStateMachine.cpp@ 176

Last change on this file since 176 was 176, checked in by Sanahuja Guillaume, 5 years ago

résolution https://devel.hds.utc.fr/software/flair/ticket/18

File size: 24.5 KB
Line 
1// %flair:license{
2// This file is part of the Flair framework distributed under the
3// CECILL-C License, Version 1.0.
4// %flair:license}
5// created: 2014/04/29
6// filename: UavStateMachine.cpp
7//
8// author: Gildas Bayard, Guillaume Sanahuja
9// Copyright Heudiasyc UMR UTC/CNRS 7253
10//
11// version: $Id: $
12//
13// purpose: meta class for UAV
14//
15//
16/*********************************************************************/
17
18#include "UavStateMachine.h"
19#include "Uav.h"
20#include <DataPlot1D.h>
21#include <GridLayout.h>
22#include <Tab.h>
23#include <TabWidget.h>
24#include <PushButton.h>
25#include <SpinBox.h>
26#include <DoubleSpinBox.h>
27#include <X4X8Multiplex.h>
28#include <Bldc.h>
29#include <Ahrs.h>
30#include <MetaUsRangeFinder.h>
31#include <ControlLaw.h>
32#include <Pid.h>
33#include <PidThrust.h>
34#include <NestedSat.h>
35#include <MetaDualShock3.h>
36#include <AhrsData.h>
37#include <BatteryMonitor.h>
38#include <FrameworkManager.h>
39#include <Vector3D.h>
40#include <Vector2D.h>
41#include <cvmatrix.h>
42#include <stdio.h>
43#include <TrajectoryGenerator1D.h>
44#include <math.h>
45
46using namespace std;
47using namespace flair::core;
48using namespace flair::gui;
49using namespace flair::sensor;
50using namespace flair::actuator;
51using namespace flair::filter;
52using namespace flair::meta;
53
54UavStateMachine::UavStateMachine(TargetController *controller):
55 Thread(getFrameworkManager(),"UavStateMachine",50),
56 uav(GetUav()),controller(controller),failSafeMode(true),flagConnectionLost(false),flagBatteryLow(false),flagCriticalSensorLost(false),flagZTrajectoryFinished(false),safeToFly(true){
57 altitudeState=AltitudeState_t::Stopped;
58 uav->UseDefaultPlot();
59
60 Tab *uavTab = new Tab(getFrameworkManager()->GetTabWidget(), "uav", 0);
61 buttonslayout = new GridLayout(uavTab->NewRow(), "buttons");
62 button_kill = new PushButton(buttonslayout->NewRow(), "kill");
63 button_start_log = new PushButton(buttonslayout->NewRow(), "start_log");
64 button_stop_log = new PushButton(buttonslayout->LastRowLastCol(), "stop_log");
65 button_take_off = new PushButton(buttonslayout->NewRow(), "take_off");
66 button_land = new PushButton(buttonslayout->LastRowLastCol(), "land");
67
68 Tab *lawTab = new Tab(getFrameworkManager()->GetTabWidget(), "control laws");
69 TabWidget *tabWidget = new TabWidget(lawTab->NewRow(), "laws");
70 setupLawTab = new Tab(tabWidget, "Setup");
71 graphLawTab = new Tab(tabWidget, "Graphes");
72
73 uRoll = new NestedSat(setupLawTab->At(0, 0), "u_roll");
74 uRoll->ConvertSatFromDegToRad();
75 uRoll->UseDefaultPlot(graphLawTab->NewRow());
76
77 uPitch = new NestedSat(setupLawTab->At(0, 1), "u_pitch");
78 uPitch->ConvertSatFromDegToRad();
79 uPitch->UseDefaultPlot(graphLawTab->LastRowLastCol());
80
81 uYaw = new Pid(setupLawTab->At(0, 2), "u_yaw");
82 uYaw->UseDefaultPlot(graphLawTab->LastRowLastCol());
83
84 uZ = new PidThrust(setupLawTab->At(1, 2), "u_z");
85 uZ->UseDefaultPlot(graphLawTab->LastRowLastCol());
86
87 getFrameworkManager()->AddDeviceToLog(uZ);
88 uZ->AddDeviceToLog(uRoll);
89 uZ->AddDeviceToLog(uPitch);
90 uZ->AddDeviceToLog(uYaw);
91
92 joy=new MetaDualShock3("uav high level controller",controller);
93 uav->GetAhrs()->AddPlot(joy->GetReferenceOrientation(),DataPlot::Blue);
94
95 altitudeMode = AltitudeMode_t::Manual;
96 orientationMode = OrientationMode_t::Manual;
97 thrustMode = ThrustMode_t::Default;
98 torqueMode = TorqueMode_t::Default;
99
100 GroupBox *reglagesGroupbox =
101 new GroupBox(uavTab->NewRow(), "takeoff/landing");
102 desiredTakeoffAltitude =
103 new DoubleSpinBox(reglagesGroupbox->NewRow(), "desired takeoff altitude",
104 " m", 0, 5, 0.1, 2, 1);
105 desiredLandingAltitude =
106 new DoubleSpinBox(reglagesGroupbox->LastRowLastCol(),
107 "desired landing altitude", " m", 0, 1, 0.1, 1);
108 altitudeTrajectory =
109 new TrajectoryGenerator1D(uavTab->NewRow(), "alt cons", "m");
110 uav->GetMetaUsRangeFinder()->GetZPlot()->AddCurve(
111 altitudeTrajectory->Matrix()->Element(0), DataPlot::Green);
112 uav->GetMetaUsRangeFinder()->GetVzPlot()->AddCurve(
113 altitudeTrajectory->Matrix()->Element(1), DataPlot::Green);
114}
115
116UavStateMachine::~UavStateMachine() {}
117
118void UavStateMachine::AddDeviceToControlLawLog(const IODevice *device) {
119 uZ->AddDeviceToLog(device);
120}
121
122void UavStateMachine::AddDataToControlLawLog(const core::io_data *data) {
123 uZ->AddDataToLog(data);
124}
125
126const TargetController *UavStateMachine::GetJoystick(void) const {
127 return controller;
128}
129
130const Quaternion &UavStateMachine::GetCurrentQuaternion(void) const {
131 return currentQuaternion;
132}
133
134const Vector3Df &UavStateMachine::GetCurrentAngularSpeed(void) const {
135 return currentAngularSpeed;
136}
137
138void UavStateMachine::AltitudeValues(float &altitude,
139 float &verticalSpeed) const {
140 FailSafeAltitudeValues(altitude, verticalSpeed);
141}
142
143void UavStateMachine::FailSafeAltitudeValues(float &altitude,
144 float &verticalSpeed) const {
145 altitude = uav->GetMetaUsRangeFinder()->z();
146 verticalSpeed = uav->GetMetaUsRangeFinder()->Vz();
147}
148
149void UavStateMachine::Run() {
150 WarnUponSwitches(true);
151 uav->StartSensors();
152
153 if (getFrameworkManager()->ErrorOccured() == true) {
154 SafeStop();
155 }
156
157 while (!ToBeStopped()) {
158 SecurityCheck();
159
160 // get controller inputs
161 CheckJoystick();
162 CheckPushButton();
163
164 if (IsPeriodSet()) {
165 WaitPeriod();
166 } else {
167 WaitUpdate(uav->GetAhrs());
168 }
169 needToComputeDefaultTorques = true;
170 needToComputeDefaultThrust = true;
171
172 SignalEvent(Event_t::EnteringControlLoop);
173
174 ComputeOrientation();
175 ComputeAltitude();
176
177 // compute thrust and torques to apply
178 ComputeTorques();
179 ComputeThrust(); // logs are added to uz, so it must be updated at last
180
181 //check nan/inf problems
182 if(!IsValuePossible(currentTorques.roll,"roll torque")
183 || !IsValuePossible(currentTorques.pitch,"pitch torque")
184 || !IsValuePossible(currentTorques.yaw,"yaw torque")
185 || !IsValuePossible(currentThrust,"thrust")) {
186
187 if(altitudeState==AltitudeState_t::Stopped) {
188 SafeStop();
189 } else {
190
191 if(failSafeMode) {
192 Warn("We are already in safe mode, the uav is going to crash!\n");
193 } else {
194 Thread::Warn("switching back to safe mode\n");
195 EnterFailSafeMode();
196 needToComputeDefaultTorques = true;//should not be necessary, but put it to be sure to compute default thrust/torques
197 needToComputeDefaultThrust = true;
198
199 ComputeTorques();
200 ComputeThrust();
201 }
202 }
203 }
204
205 // Set torques for roll, pitch and yaw angles (value between -1 and 1). Set
206 // thrust (value between 0 and 1)
207 uav->GetUavMultiplex()->SetRoll(-currentTorques.roll);
208 uav->GetUavMultiplex()->SetPitch(-currentTorques.pitch);
209 uav->GetUavMultiplex()->SetYaw(-currentTorques.yaw);
210 uav->GetUavMultiplex()->SetThrust(-currentThrust); // on raisonne en negatif
211 // sur l'altitude, a
212 // revoir avec les
213 // equations
214 uav->GetUavMultiplex()->SetRollTrim(joy->RollTrim());
215 uav->GetUavMultiplex()->SetPitchTrim(joy->PitchTrim());
216 uav->GetUavMultiplex()->SetYawTrim(0);
217 uav->GetUavMultiplex()->Update(GetTime());
218 }
219
220 WarnUponSwitches(false);
221}
222
223bool UavStateMachine::IsValuePossible(float value,std::string desc) {
224 if(isnan(value)) {
225 Warn("%s is not an number\n",desc.c_str());
226 return false;
227 } else if(isinf(value)) {
228 Warn("%s is infinite\n",desc.c_str());
229 return false;
230 } else {
231 return true;
232 }
233}
234
235
236void UavStateMachine::ComputeOrientation(void) {
237 if (failSafeMode) {
238 GetDefaultOrientation()->GetQuaternionAndAngularRates(currentQuaternion,
239 currentAngularSpeed);
240 } else {
241 GetOrientation()->GetQuaternionAndAngularRates(currentQuaternion,
242 currentAngularSpeed);
243 }
244}
245
246const AhrsData *UavStateMachine::GetOrientation(void) const {
247 return GetDefaultOrientation();
248}
249
250const AhrsData *UavStateMachine::GetDefaultOrientation(void) const {
251 return uav->GetAhrs()->GetDatas();
252}
253
254void UavStateMachine::ComputeAltitude(void) {
255 if (failSafeMode) {
256 FailSafeAltitudeValues(currentAltitude, currentVerticalSpeed);
257 } else {
258 AltitudeValues(currentAltitude, currentVerticalSpeed);
259 }
260}
261
262void UavStateMachine::ComputeReferenceAltitude(float &refAltitude,
263 float &refVerticalVelocity) {
264 if (altitudeMode == AltitudeMode_t::Manual) {
265 GetDefaultReferenceAltitude(refAltitude, refVerticalVelocity);
266 } else {
267 GetReferenceAltitude(refAltitude, refVerticalVelocity);
268 }
269}
270
271void UavStateMachine::GetDefaultReferenceAltitude(float &refAltitude,
272 float &refVerticalVelocity) {
273 float zc, dzc;
274
275 switch (altitudeState) {
276 // initiate a takeoff: increase motor speed in open loop (see ComputeThrust)
277 // until we detect a take off of 0.03m (hard coded value) above the ground.
278 case AltitudeState_t::TakingOff: {
279 if (currentAltitude > groundAltitude + 0.03) {
280 altitudeTrajectory->StartTraj(currentAltitude,
281 desiredTakeoffAltitude->Value());
282 altitudeState = AltitudeState_t::Stabilized;
283 SignalEvent(Event_t::Stabilized);
284 }
285 break;
286 }
287 // landing, only check if we reach desired landing altitude
288 case AltitudeState_t::StartLanding: {
289 if (altitudeTrajectory->Position() == desiredLandingAltitude->Value()) {
290 // The Uav target altitude has reached its landing value (typically 0)
291 // but the real Uav altitude may not have reach this value yet because of
292 // command delay. Moreover, it may never exactly reach this value if the
293 // ground is not perfectly leveled (critical case: there's a
294 // deep and narrow hole right in the sensor line of sight). That's why we
295 // have a 2 phases landing strategy.
296 altitudeState = AltitudeState_t::FinishLanding;
297 SignalEvent(Event_t::FinishLanding);
298 joy->SetLedOFF(1); // DualShock3::led1
299 }
300 }
301 // stabilized: check if z trajectory is finished
302 case AltitudeState_t::Stabilized: {
303 if (!altitudeTrajectory->IsRunning() && !flagZTrajectoryFinished) {
304 SignalEvent(Event_t::ZTrajectoryFinished);
305 flagZTrajectoryFinished = true;
306 }
307 if (flagZTrajectoryFinished && desiredTakeoffAltitude->ValueChanged()) {
308 flagZTrajectoryFinished = false;
309 altitudeTrajectory->StartTraj(currentAltitude,
310 desiredTakeoffAltitude->Value());
311 joy->SetZRef(0);
312 }
313 }
314 }
315
316 // Récupère les consignes (du joystick dans l'implémentation par défaut). La
317 // consigne joystick est une vitesse ("delta_z", dzc). le zc est calculé par
318 // la manette
319 zc = joy->ZRef(); // a revoir, la position offset devrait se calculer dans le
320 // generator
321 dzc = joy->DzRef();
322
323 // z control law
324 altitudeTrajectory->SetPositionOffset(zc);
325 altitudeTrajectory->SetSpeedOffset(dzc);
326
327 altitudeTrajectory->Update(GetTime());
328 refAltitude = altitudeTrajectory->Position();
329 refVerticalVelocity = altitudeTrajectory->Speed();
330}
331
332void UavStateMachine::GetReferenceAltitude(float &refAltitude,
333 float &refVerticalVelocity) {
334 Thread::Warn("Default GetReferenceAltitude method is not overloaded => "
335 "switching back to safe mode\n");
336 EnterFailSafeMode();
337};
338
339void UavStateMachine::ComputeThrust(void) {
340 if (altitudeMode == AltitudeMode_t::Manual) {
341 currentThrust = ComputeDefaultThrust();
342 } else {
343 currentThrust = ComputeCustomThrust();
344 }
345}
346
347float UavStateMachine::ComputeDefaultThrust(void) {
348 if (needToComputeDefaultThrust) {
349 // compute desired altitude
350 float refAltitude, refVerticalVelocity;
351 ComputeReferenceAltitude(refAltitude, refVerticalVelocity);
352
353 switch (altitudeState) {
354 case AltitudeState_t::TakingOff: {
355 // The progressive increase in motor speed is used to evaluate the motor
356 // speed that compensate the uav weight. This value
357 // will be used as an offset for altitude control afterwards
358 uZ->OffsetStepUp();
359 break;
360 }
361 case AltitudeState_t::StartLanding:
362 case AltitudeState_t::Stabilized: {
363 float p_error = currentAltitude - refAltitude;
364 float d_error = currentVerticalSpeed - refVerticalVelocity;
365 uZ->SetValues(p_error, d_error);
366 break;
367 }
368 // decrease motor speed in open loop until value offset_g , uav should have
369 // already landed or be very close to at this point
370 case AltitudeState_t::FinishLanding: {
371 if (uZ->OffsetStepDown() == false) {
372 StopMotors();
373 }
374 break;
375 }
376 }
377 uZ->Update(GetTime());
378
379 savedDefaultThrust = uZ->Output();
380 needToComputeDefaultThrust = false;
381 }
382
383 return savedDefaultThrust;
384}
385
386float UavStateMachine::ComputeCustomThrust(void) {
387 Thread::Warn("Default GetThrust method is not overloaded => switching back "
388 "to safe mode\n");
389 EnterFailSafeMode();
390 return ComputeDefaultThrust();
391}
392
393const AhrsData *UavStateMachine::ComputeReferenceOrientation(void) {
394 if (orientationMode == OrientationMode_t::Manual) {
395 return GetDefaultReferenceOrientation();
396 } else {
397 return GetReferenceOrientation();
398 }
399}
400
401const AhrsData *UavStateMachine::GetDefaultReferenceOrientation(void) const {
402 // We directly control yaw, pitch, roll angles
403 return joy->GetReferenceOrientation();
404}
405
406const AhrsData *UavStateMachine::GetReferenceOrientation(void) {
407 Thread::Warn("Default GetReferenceOrientation method is not overloaded => "
408 "switching back to safe mode\n");
409 EnterFailSafeMode();
410 return GetDefaultReferenceOrientation();
411}
412
413void UavStateMachine::ComputeTorques(void) {
414 if (torqueMode == TorqueMode_t::Default) {
415 ComputeDefaultTorques(currentTorques);
416 } else {
417 ComputeCustomTorques(currentTorques);
418 }
419}
420
421void UavStateMachine::ComputeDefaultTorques(Euler &torques) {
422 if (needToComputeDefaultTorques) {
423 const AhrsData *refOrientation = ComputeReferenceOrientation();
424 Quaternion refQuaternion;
425 Vector3Df refAngularRates;
426 refOrientation->GetQuaternionAndAngularRates(refQuaternion,
427 refAngularRates);
428 Euler refAngles = refQuaternion.ToEuler();
429 Euler currentAngles = currentQuaternion.ToEuler();
430
431 uYaw->SetValues(currentAngles.YawDistanceFrom(refAngles.yaw),
432 currentAngularSpeed.z - refAngularRates.z);
433 uYaw->Update(GetTime());
434 torques.yaw = uYaw->Output();
435
436 uPitch->SetValues(refAngles.pitch, currentAngles.pitch,
437 currentAngularSpeed.y);
438 uPitch->Update(GetTime());
439 torques.pitch = uPitch->Output();
440
441 uRoll->SetValues(refAngles.roll, currentAngles.roll, currentAngularSpeed.x);
442 uRoll->Update(GetTime());
443 torques.roll = uRoll->Output();
444
445 savedDefaultTorques = torques;
446 needToComputeDefaultTorques = false;
447 } else {
448 torques = savedDefaultTorques;
449 }
450}
451
452void UavStateMachine::ComputeCustomTorques(Euler &torques) {
453 Thread::Warn("Default ComputeCustomTorques method is not overloaded => "
454 "switching back to safe mode\n");
455 EnterFailSafeMode();
456 ComputeDefaultTorques(torques);
457}
458
459void UavStateMachine::TakeOff(void) {
460 flagZTrajectoryFinished = false;
461
462 if((altitudeState==AltitudeState_t::Stopped) && safeToFly && uav->isReadyToFly() && uav->GetBatteryMonitor()->IsBatteryLow()==false) {
463 //The uav always takes off in fail safe mode
464 flagBatteryLow=false;
465 EnterFailSafeMode();
466 joy->SetLedOFF(4);//DualShock3::led4
467 joy->SetLedOFF(1);//DualShock3::led1
468 joy->Rumble(0x70);
469 joy->SetZRef(0);
470
471 uZ->SetOffset(); // positionne l'offset de compensation de la gravité à sa
472 // valeur initiale (station sol)
473
474 uav->GetUavMultiplex()->LockUserInterface();
475 // Active les moteurs. Pouvoir les désactiver permet de pouvoir observer les
476 // consignes moteurs
477 // sans les faire tourner effectivement (en déplaçant à la main le drone)
478 uav->GetBldc()->SetEnabled(true);
479 groundAltitude = currentAltitude;
480 altitudeState = AltitudeState_t::TakingOff;
481
482 SignalEvent(Event_t::TakingOff);
483 } else {
484 Warn("cannot takeoff\n");
485 joy->ErrorNotify();
486 }
487}
488
489void UavStateMachine::Land(void) {
490 if (altitudeMode != AltitudeMode_t::Manual) {
491 SetAltitudeMode(AltitudeMode_t::Manual);
492 }
493 if (altitudeState == AltitudeState_t::Stabilized) {
494 joy->SetLedOFF(4); // DualShock3::led4
495 joy->Rumble(0x70);
496
497 altitudeTrajectory->StopTraj();
498 joy->SetZRef(0);
499 altitudeTrajectory->StartTraj(currentAltitude,desiredLandingAltitude->Value()); //shouldn't it be groundAltitude?
500 SignalEvent(Event_t::StartLanding);
501 altitudeState=AltitudeState_t::StartLanding;
502 } else if (altitudeState==AltitudeState_t::TakingOff) {
503 EmergencyLand();
504 } else {
505 joy->ErrorNotify();
506 }
507}
508
509void UavStateMachine::EmergencyLand(void) {
510 //Gradually decrease motor speed
511 //Called if landing is required during take off (motors are accelerating but Uav did not actually left the ground yet), or if critical sensors have been lost (attitude is lost)
512 altitudeState=AltitudeState_t::FinishLanding;
513 safeToFly=false;
514Printf("Emergency landing!\n");
515}
516
517void UavStateMachine::SignalEvent(Event_t event) {
518 switch (event) {
519 case Event_t::StartLanding:
520 Thread::Info("Altitude: entering 'StartLanding' state\n");
521 break;
522 case Event_t::Stopped:
523 Thread::Info("Altitude: entering 'Stopped' state\n");
524 break;
525 case Event_t::TakingOff:
526 Thread::Info("Altitude: taking off\n");
527 break;
528 case Event_t::Stabilized:
529 Thread::Info("Altitude: entering 'Stabilized' state\n");
530 break;
531 case Event_t::FinishLanding:
532 Thread::Info("Altitude: entering 'FinishLanding' state\n");
533 break;
534 case Event_t::EmergencyStop:
535 Thread::Info("Emergency stop!\n");
536 break;
537 }
538}
539
540void UavStateMachine::EmergencyStop(void) {
541 if(altitudeState!=AltitudeState_t::Stopped) {
542 StopMotors();
543 EnterFailSafeMode();
544 joy->Rumble(0x70);
545 SignalEvent(Event_t::EmergencyStop);
546 }
547 //safeToFly=false;
548 //Warn("Emergency stop, UAV will not take off again until program is rerunned\n");
549}
550
551void UavStateMachine::StopMotors(void) {
552 joy->FlashLed(1, 10, 10); // DualShock3::led1
553 uav->GetBldc()->SetEnabled(false);
554 uav->GetUavMultiplex()->UnlockUserInterface();
555 SignalEvent(Event_t::Stopped);
556 altitudeState = AltitudeState_t::Stopped;
557 uav->GetAhrs()->UnlockUserInterface();
558
559 uZ->SetValues(0, 0);
560 uZ->Reset();
561}
562
563GridLayout *UavStateMachine::GetButtonsLayout(void) const {
564 return buttonslayout;
565}
566
567void UavStateMachine::SecurityCheck(void) {
568 MandatorySecurityCheck();
569 ExtraSecurityCheck();
570}
571
572void UavStateMachine::MandatorySecurityCheck(void) {
573 if (getFrameworkManager()->ConnectionLost() && !flagConnectionLost) {
574 flagConnectionLost = true;
575 Thread::Err("Connection lost\n");
576 EnterFailSafeMode();
577 if (altitudeState == AltitudeState_t::Stopped) {
578 SafeStop();
579 } else {
580 Land();
581 }
582 }
583 if((altitudeState==AltitudeState_t::TakingOff || altitudeState==AltitudeState_t::Stabilized) && uav->GetBatteryMonitor()->IsBatteryLow() && !flagBatteryLow) {
584 flagBatteryLow=true;
585 Thread::Err("Low Battery\n");
586 EnterFailSafeMode();
587 Land();
588 }/*
589 Time now=GetTime();
590 if ((altitudeState==AltitudeState_t::Stopped) && (now-uav->GetAhrs()->lastUpdate>(Time)100*1000*1000)) { //100ms
591 flagCriticalSensorLost=true;
592 Thread::Err("Critical sensor lost\n");
593 EnterFailSafeMode();
594 EmergencyLand();
595 }*/
596}
597
598void UavStateMachine::CheckJoystick(void) {
599 GenericCheckJoystick();
600 ExtraCheckJoystick();
601}
602
603void UavStateMachine::GenericCheckJoystick(void) {
604 static bool isEmergencyStopButtonPressed = false;
605 static bool isTakeOffButtonPressed = false;
606 static bool isSafeModeButtonPressed = false;
607
608 if (controller->IsButtonPressed(1)) { // select
609 if (!isEmergencyStopButtonPressed) {
610 isEmergencyStopButtonPressed = true;
611 Thread::Info("Emergency stop from joystick\n");
612 EmergencyStop();
613 }
614 } else
615 isEmergencyStopButtonPressed = false;
616
617 if (controller->IsButtonPressed(0)) { // start
618 if (!isTakeOffButtonPressed) {
619 isTakeOffButtonPressed = true;
620 switch (altitudeState) {
621 case AltitudeState_t::Stopped:
622 TakeOff();
623 break;
624 case AltitudeState_t::Stabilized:
625 Land();
626 break;
627 default:
628 joy->ErrorNotify();
629 break;
630 }
631 }
632 } else
633 isTakeOffButtonPressed = false;
634
635 // cross
636 // gsanahuj:conflict with Majd programs.
637 // check if l1,l2,r1 and r2 are not pressed
638 // to allow a combination in user program
639 if (controller->IsButtonPressed(5) && !controller->IsButtonPressed(6) &&
640 !controller->IsButtonPressed(7) && !controller->IsButtonPressed(9) &&
641 !controller->IsButtonPressed(10)) {
642 if (!isSafeModeButtonPressed) {
643 isSafeModeButtonPressed = true;
644 Thread::Info("Entering fail safe mode\n");
645 EnterFailSafeMode();
646 }
647 } else
648 isSafeModeButtonPressed = false;
649}
650
651void UavStateMachine::CheckPushButton(void) {
652 GenericCheckPushButton();
653 ExtraCheckPushButton();
654}
655
656void UavStateMachine::GenericCheckPushButton(void) {
657 if (button_kill->Clicked() == true)
658 SafeStop();
659 if (button_take_off->Clicked() == true)
660 TakeOff();
661 if (button_land->Clicked() == true)
662 Land();
663 if (button_start_log->Clicked() == true)
664 getFrameworkManager()->StartLog();
665 if (button_stop_log->Clicked() == true)
666 getFrameworkManager()->StopLog();
667}
668
669void UavStateMachine::EnterFailSafeMode(void) {
670 if(altitudeState!=AltitudeState_t::StartLanding) SetAltitudeMode(AltitudeMode_t::Manual);//
671 SetOrientationMode(OrientationMode_t::Manual);
672 SetThrustMode(ThrustMode_t::Default);
673 SetTorqueMode(TorqueMode_t::Default);
674
675 GetDefaultOrientation()->GetQuaternionAndAngularRates(currentQuaternion,
676 currentAngularSpeed);
677 joy->SetYawRef(currentQuaternion);
678 uYaw->Reset();
679 uPitch->Reset();
680 uRoll->Reset();
681
682 failSafeMode = true;
683 SignalEvent(Event_t::EnteringFailSafeMode);
684}
685
686bool UavStateMachine::ExitFailSafeMode(void) {
687 // only exit fail safe mode if in Stabilized altitude state
688 // gsanahuj: pour la demo inaugurale on ne peut pas etre en failsafe
689 // le ruban perturbe l'us
690 /*
691 if (altitudeState!=AltitudeState_t::Stabilized) {
692 return false;
693 } else*/ {
694 failSafeMode = false;
695 return true;
696 }
697}
698
699bool UavStateMachine::SetTorqueMode(TorqueMode_t const &newTorqueMode) {
700 if ((newTorqueMode == TorqueMode_t::Custom) && (failSafeMode)) {
701 if (!ExitFailSafeMode())
702 return false;
703 }
704 // When transitionning from Custom to Default torque mode, we should reset the
705 // default control laws
706 if ((torqueMode == TorqueMode_t::Custom) &&
707 (newTorqueMode == TorqueMode_t::Default)) {
708 uYaw->Reset();
709 uPitch->Reset();
710 uRoll->Reset();
711 }
712 torqueMode = newTorqueMode;
713 return true;
714}
715
716bool UavStateMachine::SetAltitudeMode(AltitudeMode_t const &newAltitudeMode) {
717 if ((newAltitudeMode == AltitudeMode_t::Custom) && (failSafeMode)) {
718 if (!ExitFailSafeMode())
719 return false;
720 }
721 altitudeMode = newAltitudeMode;
722 //avoid starting trajectory at take off (it will be started when altitudeState==AltitudeState_t::Stabilized)
723 if(altitudeState!=AltitudeState_t::Stopped) GotoAltitude(desiredTakeoffAltitude->Value());
724
725 return true;
726}
727
728bool UavStateMachine::GotoAltitude(float desiredAltitude) {
729 if (altitudeMode != AltitudeMode_t::Manual) {
730 return false;
731 }
732 altitudeTrajectory->StartTraj(uav->GetMetaUsRangeFinder()->z(),
733 desiredAltitude);
734 return true;
735}
736
737bool UavStateMachine::SetOrientationMode(
738 OrientationMode_t const &newOrientationMode) {
739 if ((newOrientationMode == OrientationMode_t::Custom) && (failSafeMode)) {
740 if (!ExitFailSafeMode())
741 return false;
742 }
743 // When transitionning from Custom to Manual mode we must reset to yaw
744 // reference to the current absolute yaw angle,
745 // overwise the Uav will abruptly change orientation
746 if ((orientationMode == OrientationMode_t::Custom) &&
747 (newOrientationMode == OrientationMode_t::Manual)) {
748 joy->SetYawRef(currentQuaternion);
749 }
750 orientationMode = newOrientationMode;
751 return true;
752}
753
754bool UavStateMachine::SetThrustMode(ThrustMode_t const &newThrustMode) {
755 if ((newThrustMode == ThrustMode_t::Custom) && (failSafeMode)) {
756 if (!ExitFailSafeMode())
757 return false;
758 }
759 thrustMode = newThrustMode;
760 return true;
761}
Note: See TracBrowser for help on using the repository browser.