source: pacpusframework/trunk/3rd/apache-log4cxx/include/log4cxx/rolling/timebasedrollingpolicy.h@ 184

/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */


#if !defined(_LOG4CXX_ROLLING_TIME_BASED_ROLLING_POLICY_H)
#define _LOG4CXX_ROLLING_TIME_BASED_ROLLING_POLICY_H

#include <log4cxx/portability.h>
#include <log4cxx/rolling/rollingpolicybase.h>
#include <log4cxx/rolling/triggeringpolicy.h>

namespace log4cxx {

    namespace rolling {



        /**
         * <code>TimeBasedRollingPolicy</code> is both easy to configure and quite
         * powerful.
         *
         * <p>In order to use  <code>TimeBasedRollingPolicy</code>, the
         * <b>FileNamePattern</b> option must be set. It basically specifies the name of the
         * rolled log files. The value <code>FileNamePattern</code> should consist of
         * the name of the file, plus a suitably placed <code>%d</code> conversion
         * specifier. The <code>%d</code> conversion specifier may contain a date and
         * time pattern as specified by the {@link log4cxx::helpers::SimpleDateFormat} class. If
         * the date and time pattern is ommitted, then the default pattern of
         * "yyyy-MM-dd" is assumed. The following examples should clarify the point.
         *
         * <p>
         * <table cellspacing="5px" border="1">
         *   <tr>
         *     <th><code>FileNamePattern</code> value</th>
         *     <th>Rollover schedule</th>
         *     <th>Example</th>
         *   </tr>
         *   <tr>
         *     <td nowrap="true"><code>/wombat/folder/foo.%d</code></td>
         *     <td>Daily rollover (at midnight).  Due to the omission of the optional
         *         time and date pattern for the %d token specifier, the default pattern
         *         of "yyyy-MM-dd" is assumed, which corresponds to daily rollover.
         *     </td>
         *     <td>During November 23rd, 2004, logging output will go to
         *       the file <code>/wombat/foo.2004-11-23</code>. At midnight and for
         *       the rest of the 24th, logging output will be directed to
         *       <code>/wombat/foo.2004-11-24</code>.
         *     </td>
         *   </tr>
         *   <tr>
         *     <td nowrap="true"><code>/wombat/foo.%d{yyyy-MM}.log</code></td>
         *     <td>Rollover at the beginning of each month.</td>
         *     <td>During the month of October 2004, logging output will go to
         *     <code>/wombat/foo.2004-10.log</code>. After midnight of October 31st
         *     and for the rest of November, logging output will be directed to
         *       <code>/wombat/foo.2004-11.log</code>.
         *     </td>
         *   </tr>
         * </table>
         * <h2>Automatic file compression</h2>
         * <code>TimeBasedRollingPolicy</code> supports automatic file compression.
         * This feature is enabled if the value of the <b>FileNamePattern</b> option
         * ends with <code>.gz</code> or <code>.zip</code>.
         * <p>
         * <table cellspacing="5px" border="1">
         *   <tr>
         *     <th><code>FileNamePattern</code> value</th>
         *     <th>Rollover schedule</th>
         *     <th>Example</th>
         *   </tr>
         *   <tr>
         *     <td nowrap="true"><code>/wombat/foo.%d.gz</code></td>
         *     <td>Daily rollover (at midnight) with automatic GZIP compression of the
         *      arcived files.</td>
         *     <td>During November 23rd, 2004, logging output will go to
         *       the file <code>/wombat/foo.2004-11-23</code>. However, at midnight that
         *       file will be compressed to become <code>/wombat/foo.2004-11-23.gz</code>.
         *       For the 24th of November, logging output will be directed to
         *       <code>/wombat/folder/foo.2004-11-24</code> until its rolled over at the
         *       beginning of the next day.
         *     </td>
         *   </tr>
         * </table>
         *
         * <h2>Decoupling the location of the active log file and the archived log files</h2>
         * <p>The <em>active file</em> is defined as the log file for the current period
         * whereas <em>archived files</em> are thos files which have been rolled over
         * in previous periods.
         *
         * <p>By setting the <b>ActiveFileName</b> option you can decouple the location
         * of the active log file and the location of the archived log files.
         * <p>
         *  <table cellspacing="5px" border="1">
         *   <tr>
         *     <th><code>FileNamePattern</code> value</th>
         *     <th>ActiveFileName</th>
         *     <th>Rollover schedule</th>
         *     <th>Example</th>
         *   </tr>
         *   <tr>
         *     <td nowrap="true"><code>/wombat/foo.log.%d</code></td>
         *     <td nowrap="true"><code>/wombat/foo.log</code></td>
         *     <td>Daily rollover.</td>
         *
         *     <td>During November 23rd, 2004, logging output will go to
         *       the file <code>/wombat/foo.log</code>. However, at midnight that file
         *       will archived as <code>/wombat/foo.log.2004-11-23</code>. For the 24th
         *       of November, logging output will be directed to
         *       <code>/wombat/folder/foo.log</code> until its archived as
         *       <code>/wombat/foo.log.2004-11-24</code> at the beginning of the next
         *       day.
         *     </td>
         *   </tr>
         * </table>
         * <p>
         * If configuring programatically, do not forget to call {@link #activateOptions}
         * method before using this policy. Moreover, {@link #activateOptions} of
         * <code> TimeBasedRollingPolicy</code> must be called <em>before</em> calling
         * the {@link #activateOptions} method of the owning
         * <code>RollingFileAppender</code>.
         *
         * 
         * 
         */
        class LOG4CXX_EXPORT TimeBasedRollingPolicy : public RollingPolicyBase,
             public TriggeringPolicy {
          DECLARE_LOG4CXX_OBJECT(TimeBasedRollingPolicy)
          BEGIN_LOG4CXX_CAST_MAP()
                  LOG4CXX_CAST_ENTRY(TimeBasedRollingPolicy)
                  LOG4CXX_CAST_ENTRY_CHAIN(RollingPolicyBase)
                  LOG4CXX_CAST_ENTRY_CHAIN(TriggeringPolicy)
          END_LOG4CXX_CAST_MAP()

        private:
        /**
         * Time for next determination if time for rollover.
         */
        log4cxx_time_t nextCheck;

        /**
         * File name at last rollover.
         */
        LogString lastFileName;

        /**
         * Length of any file type suffix (.gz, .zip).
         */
        int suffixLength;

        public:
            TimeBasedRollingPolicy();
            void addRef() const;
            void releaseRef() const;
            void activateOptions(log4cxx::helpers::Pool& );
            /**
           * Initialize the policy and return any initial actions for rolling file appender.
           *
           * @param file current value of RollingFileAppender.getFile().
           * @param append current value of RollingFileAppender.getAppend().
           * @param pool pool for any required allocations.
           * @return Description of the initialization, may be null to indicate
           * no initialization needed.
           * @throws SecurityException if denied access to log files.
           */
           RolloverDescriptionPtr initialize(
            const LogString& file,
            const bool append,
            log4cxx::helpers::Pool& pool);

          /**
           * Prepare for a rollover.  This method is called prior to
           * closing the active log file, performs any necessary
           * preliminary actions and describes actions needed
           * after close of current log file.
           *
           * @param activeFile file name for current active log file.
           * @param pool pool for any required allocations.
           * @return Description of pending rollover, may be null to indicate no rollover
           * at this time.
           * @throws SecurityException if denied access to log files.
           */
          RolloverDescriptionPtr rollover(const LogString& activeFile,
            log4cxx::helpers::Pool& pool);

/**
 * Determines if a rollover may be appropriate at this time.  If
 * true is returned, RolloverPolicy.rollover will be called but it
 * can determine that a rollover is not warranted.
 *
 * @param appender A reference to the appender.
 * @param event A reference to the currently event.
 * @param filename The filename for the currently active log file.
 * @param fileLength Length of the file in bytes.
 * @return true if a rollover should occur.
 */
virtual bool isTriggeringEvent(
  Appender* appender,
  const log4cxx::spi::LoggingEventPtr& event,
  const LogString& filename,
  size_t fileLength);

  protected:
               log4cxx::pattern::PatternMap getFormatSpecifiers() const;

        };

        LOG4CXX_PTR_DEF(TimeBasedRollingPolicy);

    }
}

#endif