source: flair-src/trunk/demos/DemoGps/uav/src/DemoGps.cpp@ 475

//  created:    2016/07/01
//  filename:   DemoGps.cpp
//
//  author:     Guillaume Sanahuja
//              Copyright Heudiasyc UMR UTC/CNRS 7253
//
//  version:    $Id: $
//
//  purpose:    demo GPS
//
//
/*********************************************************************/

#include "DemoGps.h"
#include <TargetController.h>
#include <Uav.h>
#include <GridLayout.h>
#include <PushButton.h>
#include <DataPlot1D.h>
#include <DataPlot2D.h>
#include <MetaDualShock3.h>
#include <FrameworkManager.h>
#include <TrajectoryGenerator2DCircle.h>
#include <cmath>
#include <Tab.h>
#include <Pid.h>
#include <Ahrs.h>
#include <AhrsData.h>
#include <RTDM_SerialPort.h>
#include <Imu.h>
#include <NmeaGps.h>

using namespace std;
using namespace flair::core;
using namespace flair::gui;
using namespace flair::sensor;
using namespace flair::filter;
using namespace flair::meta;

DemoGps::DemoGps(TargetController* controller)
    : UavStateMachine(controller)
    , behaviourMode(BehaviourMode_t::Default) {
  Uav* uav = GetUav();
  startCircle = new PushButton(GetButtonsLayout()->NewRow(), "start_circle");
  stopCircle = new PushButton(GetButtonsLayout()->LastRowLastCol(), "stop_circle");

  circle = new TrajectoryGenerator2DCircle(uav->GetGps()->GetLayout()->NewRow(), "circle");
  // todo: add graphs in gps plot
  /*
  uav->GetVrpnObject()->xPlot()->AddCurve(circle->Matrix()->Element(0,0),DataPlot::Blue);
  uav->GetVrpnObject()->yPlot()->AddCurve(circle->Matrix()->Element(0,1),DataPlot::Blue);
  uav->GetVrpnObject()->VxPlot()->AddCurve(circle->Matrix()->Element(1,0),DataPlot::Blue);
  uav->GetVrpnObject()->VyPlot()->AddCurve(circle->Matrix()->Element(1,1),DataPlot::Blue);
  uav->GetVrpnObject()->XyPlot()->AddCurve(circle->Matrix()->Element(0,1),circle->Matrix()->Element(0,0),DataPlot::Blue,"circle");*/

  uX = new Pid(setupLawTab->At(1, 0), "u_x");
  uX->UseDefaultPlot(graphLawTab->NewRow());
  uY = new Pid(setupLawTab->At(1, 1), "u_y");
  uY->UseDefaultPlot(graphLawTab->LastRowLastCol());

  customReferenceOrientation = new AhrsData(this, "reference");
  uav->GetAhrs()->AddPlot(customReferenceOrientation, DataPlot::Yellow);
  AddDataToControlLawLog(customReferenceOrientation);

  customOrientation = new AhrsData(this, "orientation");
}

DemoGps::~DemoGps() {
}

AhrsData* DemoGps::GetReferenceOrientation(void) {
  Vector2Df pos_err, vel_err; // in Uav coordinate system
  float yaw_ref;
  Euler refAngles;

  PositionValues(pos_err, vel_err, yaw_ref);

  refAngles.yaw = yaw_ref;

  uX->SetValues(pos_err.x, vel_err.x);
  uX->Update(GetTime());
  refAngles.pitch = uX->Output();

  uY->SetValues(pos_err.y, vel_err.y);
  uY->Update(GetTime());
  refAngles.roll = -uY->Output();

  customReferenceOrientation->SetQuaternionAndAngularRates(refAngles.ToQuaternion(), Vector3Df(0, 0, 0));

  return customReferenceOrientation;
}

void DemoGps::PositionValues(Vector2Df& pos_error, Vector2Df& vel_error, float& yaw_ref) {
  Vector3Df uav_pos, uav_vel;
  Vector2Df uav_2Dpos, uav_2Dvel;

  // TODO GPS position and circle center
  // GetUav()->GetVrpnObject()->GetPosition(uav_pos);
  // GetUav()->GetVrpnObject()->GetSpeed(uav_vel);

  uav_pos.To2Dxy(uav_2Dpos);
  uav_vel.To2Dxy(uav_2Dvel);

  if(behaviourMode == BehaviourMode_t::PositionHold) {
    pos_error = uav_2Dpos - posHold;
    vel_error = uav_2Dvel;
    yaw_ref = yawHold;
  } else { // Circle
    Vector2Df circle_pos, circle_vel;
    Vector2Df target_2Dpos;

    circle->SetCenter(target_2Dpos);

    // circle reference
    circle->Update(GetTime());
    circle->GetPosition(circle_pos);
    circle->GetSpeed(circle_vel);

    // error in optitrack frame
    pos_error = uav_2Dpos - circle_pos;
    vel_error = uav_2Dvel - circle_vel;
    yaw_ref = atan2(target_2Dpos.y - uav_pos.y, target_2Dpos.x - uav_pos.x);
  }

  // error in uav frame
  Quaternion currentQuaternion = GetCurrentQuaternion();
  Euler currentAngles; // in vrpn frame
  currentQuaternion.ToEuler(currentAngles);
  pos_error.Rotate(-currentAngles.yaw);
  vel_error.Rotate(-currentAngles.yaw);
}

void DemoGps::SignalEvent(Event_t event) {
  UavStateMachine::SignalEvent(event);
  switch(event) {
  case Event_t::TakingOff:
    behaviourMode = BehaviourMode_t::Default;
    break;
  case Event_t::EnteringControlLoop:
    if((behaviourMode == BehaviourMode_t::Circle) && (!circle->IsRunning())) {
      GpsPositionHold();
    }
    break;
  case Event_t::EnteringFailSafeMode:
    behaviourMode = BehaviourMode_t::Default;
    break;
  }
}

void DemoGps::ExtraSecurityCheck(void) {
}

void DemoGps::ExtraCheckPushButton(void) {
  if(startCircle->Clicked() && (behaviourMode != BehaviourMode_t::Circle)) {
    StartCircle();
  }
  if(stopCircle->Clicked() && (behaviourMode == BehaviourMode_t::Circle)) {
    StopCircle();
  }
}

void DemoGps::ExtraCheckJoystick(void) {
  // R1 and Circle
  if(GetTargetController()->IsButtonPressed(9) && GetTargetController()->IsButtonPressed(4) &&
     (behaviourMode != BehaviourMode_t::Circle)) {
    StartCircle();
  }

  // R1 and Cross
  if(GetTargetController()->IsButtonPressed(9) && GetTargetController()->IsButtonPressed(5) &&
     (behaviourMode == BehaviourMode_t::Circle)) {
    StopCircle();
  }
}

void DemoGps::StartCircle(void) {
  if(SetOrientationMode(OrientationMode_t::Custom)) {
    Thread::Info("DemoGps: start circle\n");
  } else {
    Thread::Warn("DemoGps: could not start circle\n");
    return;
  }
  Vector3Df uav_pos;
  Vector2Df uav_2Dpos, target_2Dpos;

  circle->SetCenter(target_2Dpos);

  // todo get uav and circle pos by gps
  uav_pos.To2Dxy(uav_2Dpos);
  circle->StartTraj(uav_2Dpos);

  uX->Reset();
  uY->Reset();
  behaviourMode = BehaviourMode_t::Circle;
}

void DemoGps::StopCircle(void) {
  circle->FinishTraj();
  // GetJoystick()->Rumble(0x70);
  Thread::Info("DemoGps: finishing circle\n");
}

void DemoGps::GpsPositionHold(void) {

  // tood set yawHold and posHold

  uX->Reset();
  uY->Reset();
  behaviourMode = BehaviourMode_t::PositionHold;
  SetOrientationMode(OrientationMode_t::Custom);
  Thread::Info("DemoGps: holding position\n");
}